PWM高速开关阀控液压缸位置控制系统的控制-AtlantisPress.PDFVIP

5th International Conference on Measurement, Instrumentation and Automation (ICMIA 2016) H  Control of High-speed On/off Valve Hydraulic Position Control System HE Juan , LUO De-lian School of Physics and Mechanical Electrical Engineering, Zunyi Normal College , Zunyi 563002,China Keywords: H  control; High-speed On/Off Valve;Digital Simulation . Abstract: Based on PWM(pulse-width-modulation) hydraulic position control of high-speed on/off valve ,in order to conquer uncertain parameter to disturb control system . Design a method of single variable H  controller in this article .By simulation and analyzing ,the H  controller was proved to be an effective method. Introduction Nowadays, the development of the hydraulic servo control technology is very rapid, it is widely used with its fast response and high control precision. Hydraulic servo control technology is a kind of closed loop control technology, the reason that the control precision is high because the output signal can be fed back to the system by the control system with feedback device and can be used to generate an error signal further to control signal output. Hydraulic servo control technology[1-3] is an important branch of the development of hydraulic transmission technology. The essence of hydraulic servo control system is a closed loop control system, and it is relatively open loop control system. The development of open loop control technology is earlier and also relatively simple. The original signal of the input is used directly to control the signal of