异步累积叠轧纯铜再结晶温度、时间对孪晶的影响.PDFVIP

上半月出版 Casting Forging Welding 金属铸锻焊技术 异步累积叠轧纯铜再结晶温度 时间对孪晶的影响 周蕾袁 史庆南袁 王军丽袁 米辉袁 刘润 渊昆明理工大学 材料科学与工程学院袁云南 昆明 650093冤 摘 要院采用异步叠轧法辅以热处理制备超细孪晶铜材袁研究了不同再结晶退火温度和时间袁对退火组织和其中 退火孪晶的影响遥结果表明院当退火温度在185 时袁随着退火时间的延长袁发生再结晶的区域增多袁退火孪晶也相应增 多袁但是再结晶不完全曰当退火温度在 190 时袁在20～25min 退火时间内形成了均匀细小的退火孪晶袁退火孪晶大小 在2 滋m 左右曰当退火温度达到220 时袁退火孪晶的尺寸明显长大袁且数量有所减少袁达不到所需的 细孪晶铜的要求遥 关键词院 铜曰异步累积叠轧曰再结晶曰 细孪晶 中图分类号院TG111 文献标识码院 文章编号院 Effects of Recrystallization Annealing Temperature and Time on Upon Twins in Pure Copper by AARB ZHOU Lei, SHI Qingnan, WANG Junli, MI Hui, LIU Run (Facuty of Material Scinece and Engineering, Kunming University of Science Technology, Kunming 650093, China) Abstract 院The Asymmetrical Accumulative Rolling Bonding (AARB) method supplemented by heat treatment was used to prepare ultra-fine twin copper. The effects of recrystallization annealing temperature and time on the annealing twin were studied. The results indicate that when the annealing temperature is 185 , as the extension of the annealing time, recrystallization regional increases, annealing twins are correspondingly increased, but incomplete recrystallization. When the annealing temperature is 190 , 20min-25min annealing time forming a uniform fine annealing twins, annealing twin size is around 2 滋m. When the annealing temperature reaches 220 , annealing twins size obviously grows up, but the number of annealing twins decreased in derrease, the annealing twin can not meet the require