纸机工程中仓行车控制器使用说明.pdfVIP

Automatic paper storage cranes with vacuum lifter Automatic paper storage cranes Name : Peter Prein with vacuum lifter Date : 07.11.2008 Operating instructions for radio control Ml : 00 CONTENTS: 1 INSTALLATION DESCRIPTION2 2 OPERATION OF THE CRANE INSTALLATION BY MEANS OF RADIO CONTROL3 2.1 Safety regulations 3 2.2 Hazard information3 3 ASSIGNMENT OF THE RADIO CONTROL SYSTEM 5 4 TRANSMITTER FUNCTIONS 6 4.1 Transmitter layout 6 4.2 General operating and display elements 7 4.2.1 Emergency-stop latched pushbutton7 4.2.2 Pushbutton: Horn 7 4.2.3 Pushbutton: Lamp test7 4.2.4 Pushbutton: Check emergency limit switch8 4.2.5 Pushbutton: Reset8 4.2.6 Selector switch: Operating mode crane travel unit8 4.2.7 Toggle switch: Crane switch On - Off 9 4.2.8 Toggle switch: Vacuum suck / release9 4.2.9 Pushbutton: Two-hand control9 4.2.10 Switch: Operating mode selection 10 4.2.11 Pushbutton: Start 10 4.2.12 Pushbutton: Stop10 4.2.13 Toggle switch: Bypass slack rope 10 4.2.14 Displays: Pin position above the tube 11 4.2.15 Display: Swaying load handling attachment 11 4.3 Function operating elements : Travel motions12 4.3.1 Master controller: Long + cross travel12 4.3.1.1 Long travel12 4.3.1.2 Cross travel 12 4.3.2 Master controller: Hoist unit 13 4.3.2.1 Hoist unit 13 4.4 Function operating elements : Display + command icon 14 4.4.1 Switching on the installation 14 4.4.2 Operation of the display15 5 INFORMATION FOR SERVICE PERSONNEL 17 5.1 Editing the variab