《注塑塑料饭盒注塑模设计课程设计说明书》.doc

目 录 摘要 2 1前 言 3 2塑件的工艺分析 3 2.1塑件原材料分析 3 2.2塑件结构、尺寸精度及表面质量分析 4 2.3塑件的体积与重量 5 2.4塑件注塑工艺参数的确定 5 3拟定成型方案 6 3.1分型面的选择 6 3.2确定型腔布置 7 3.3浇注系统的设计 8 3.3.1主流道的设计 8 3.3.2浇口设计 8 4.模具成型零件的设计与计算 9 4.1凸模、凹模、型芯设计与计算 9 4.2型腔侧壁厚度和底板的计算 10 5.脱模机构的设计与计算 12 5.1脱模机构的设计原则 12 5.2脱模力的计算 12 6.合模导向机构设计 13 7.注塑机的选定与相关参数的校核 14 7.1注塑机初步的选定 14 7.2注塑机相关参数的校核 14 8.设计小结 15 参考文献 15 塑料饭盒注塑模设计 学 生： 指导老师： 摘要：本课题主要是针对盒的模具设计,通过对塑件进行工艺的分析和比较,最终设计出一副注塑模。该课题从产品结构工艺性，具体模具结构出发，对模具的浇注系统、模具成型部分的结构、顶出系统、冷却系统、注塑机的选择及有关参数的校核、都有详细的设计，同时并简单的编制了模具的加工工艺。通过整个设计过程表明该模具能够达到此塑件所要求的加工工艺。根据题目设计的主要任务是盒注塑模具的设计也就是设计一副注塑模具来生产塑件产品，以实现自动化提高产量。针对的具体结构，该模具是点浇口的双分型面注射模具。otted molded plastic lunch boxs mold design Student: Tutor: Abstract: This topic mainly aims at potted molded plastic lunch boxs mold design, this plastic lunch box material for the non-toxic PP material, is in the daily life the common one kind models a product. Through to models to carry on the craft the analysis and the comparison, designs a note mold finally. This topic from the product mix technology capability, the concrete mold structure embarks, to molds gating system, the mold formation parts structure, goes against the system, the cooling system, injection molding machines choice and the related parameter examination, has the detailed design, simultaneously and simple establishment molds processing craft. Through the entire design process indicated that this mold can achieve this to model the processing craft which an institute requests. According to the topic designs primary mission is the lunch box injection molds design, is also designs an injection mold to produce models a product, realizes the automation to raise the output. In view of models a concrete structure, this mold is the runner duplex profile injection mold.. Key word: note mold , plastic lunch box 1 前 言 随着中国当前的经济形势的日趋好转，在“实现中华民族的伟大复兴”口号的倡引下，中国的制造业也日趋蓬勃发展；而模具技术已成为衡量一个国家制造业水平的重要标志之一，模具工业能促进工业产品生产的发展和质量提高，并能获得极大的经济效益，因而引起了各国的高度重视和赞赏。在日本，模具被誉为“进入富裕的原动力”，德国则冠之为“金属加工业的帝王”，在罗马尼亚则更为直接：“模具就是黄金”