ospf多区域配置实力,包括完全末节和 nssa.docVIP

r1(config-router)#do sho run hostname r1 interface Loopback1 ip address 8.8.1.1 255.255.255.0 interface FastEthernet0/0 no ip address shutdown duplex auto speed auto interface Serial1/0 ip address 8.8.12.1 255.255.255.0 serial restart-delay 0 router ospf 12 router-id 8.8.1.1 log-adjacency-changes area 12 stub no-summary network 8.8.1.1 0.0.0.0 area 12 network 8.8.12.0 0.0.0.255 area 12 ! r1#sho ip route Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route Gateway of last resort is 8.8.12.2 to network 0.0.0.0 8.0.0.0/24 is subnetted, 2 subnets C 8.8.1.0 is directly connected, Loopback1 C 8.8.12.0 is directly connected, Serial1/0 O*IA 0.0.0.0/0 [110/65] via 8.8.12.2, 00:24:39, Serial1/0 r2(config-router)#do sho run Building configuration... ! hostname r2 interface Loopback1 ip address 8.8.2.2 255.255.255.0 interface Serial1/0 ip address 8.8.12.2 255.255.255.0 serial restart-delay 0 interface Serial1/1 ip address 8.8.23.2 255.255.255.0 serial restart-delay 0 router ospf 12 router-id 8.8.2.2 log-adjacency-changes area 12 stub no-summary area 12 range 8.8.0.0 255.255.0.0 network 8.8.2.2 0.0.0.0 area 0 network 8.8.12.0 0.0.0.255 area 12 network 8.8.23.0 0.0.0.255 area 0 r2(config-router)#do show ip rou Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1,