A的智能测频仪的方案毕业方案论文.docxVIP

基于AT89C51的智能测频仪的设计摘要目前，在电子技术领域内，频率是一个最基本的参数，频率与其他电参量的测量方案以及测量后的结果都有密切关系，因此频率的测量就显得更为重要。由于频率信号抗干扰性强, 易于传输, 可以获得较高的测量精度, 因此在现代测量仪器中, 将待测信号转化为频率信号是低成本实现高精度、高分辨率测量和高抗干扰的经典做法。 此设计基于AT89C51的智能测频仪的设计，主要应用Protel99进行系统图设计，用C语言编程以达到实现测频率的过程通过对软硬件的编程和设计使的整个系统具有结构紧凑、体积小，可靠性高，测量频率范围宽、精度高等优点。整个设计包括硬件设计和软件设计。在硬件设计部分，具体介绍了系统硬件设计方案以及显示板设计，而软件设计包括固件程序设计、驱动程序设计和应用程序设计三大部分，其最终目标是实现对频率的测量显示。关键词 ：测量频率，单片机AT89C51，Protel99Based on AT89C51 Frequency of Intelligent DesignAbstractAt present, in the field of electronic technology, frequency is the fundamental parameters, frequency and other electrical parameters of the measurement program, as well as the result of measurement are closely related to the frequency of measurement, therefore it is even more important. Frequency signals as a result of strong anti-jamming, easy to transport, access to high precision, so in modern measuring instruments, the test signal will be converted to the frequency signal is low-cost, high precision, high-resolution measurements and high anti-interference classical approach.This design is based on AT89C51 Frequency of Intelligent Design, Protel99 major application system design, made with C language programming in order to achieve the realization of the process of measuring the frequency of hardware and software programming and design of the entire system with compact structure, small size, high reliability, measurement frequency range and high precision.The whole design, including hardware design and software design. In the hardware design of the details of the system hardware design and display design. And software design including the design of firmware, drivers, application design and the design of three large groups, their ultimate goal is to achieve the frequency measurements show .Key words: Measure frequency; the one-chip computer AT89C51; Protel99 目录摘要IAbstractII目录III第一章 引 言11.1 研究背景和意义11.2 基于单片机测量频率的发展状况21.3 论文所做的工作2第二章 硬件组成42.1 AT89C51单片机简介42.1.1 AT89C51单片机主要特性42.1.2 管脚说明52.1.3 振荡器特性72.1.4 芯片擦