基于ANSYS的立式电解加工机床关键部件模态分析.PDFVIP

# # : 1001- 2265(2009)05- 0042- 04 基于 ANSYS的立式电解加工机床关键部件模态分析 陈远龙, 张亮, 万胜美, 王天霁 (合肥工业大学机械与汽车工程学院, 合肥 230009) : 电解加工机床经常处在动态交变负荷下工作有必要对机床部件进行模态分析, 了解其动 态特性(即固有频率和振型), 以便优化结构, 提高加工性能用实体建模软件 CATIA 对 DX3150 电解加工机床零部件进行三维建模及装配, 将得到的模型简化并导入到有限元分析软件 ANSYS 中 进行模态分析,得到前 6 阶的固有频率和振型通过振型图的显示, 发现关键部件的各阶振型较为 理想 : 电解加工机床; 实体建模; 模态分析 :TH16; TG65 :A ModalAnalysis ofKey Parts ofVerticalElectrochemicalMachineToolBased onANSYS 库 CHENYuan-long, ZHANG Liang, WA NSheng-me,i WANG Tian-ji (SchoolofMechanicalandAutomotiveEngineering, HefeiUniversityofTechnology, Hefei230009, China) 例 Abstract: Electrochemical(ECM) machine tooloftenworkswithdynamicoralternating load. In order toopt-i mize its structure and mprovei its performance, it is necessary analyzingmodes ofmachine parts and under- 案 standing thedynamiccharacteristics ( the natural frequencies and vibrationmodes). Built and assembled the E 3D solidmodes ofkey partsofDX3150 verticalelectrochemicalmachine toolbyCATIA software. Then they A were imported intoANSYS software formodal analysis after simplified. Thenatural frequencies of the firstsix C vibrationmodesweregained. Thevibrationmodecharts illustratetha,t allvibrationmodesofkeypartsarerela- tively idea.l Key words: electrochemicalmachine too;l SolidModeling; modalanalysis 模 凯 CATIAV5 DX3150 0 O () DX3150 ( 1):, E M , , CATIA,