TOPS+Pro软件在液态乳品包装优化设计中的应用研讨.pdfVIP

TOPS Pro 软件在液态乳品包装优化设计中的应用研究1 王颖，孔繁迪，刘美华，温芮，计宏伟 天津商业大学机械工程学院包装系，天津300134 摘要：无菌加工技术的纸质砖形包装液态奶因其方便携带、质量好和保质期长等优点受到人们的青睐， 但是较高的包装价格也是人们关心的问题。本文基于减少使用包装材料的考虑，通过数学计算，结合使用 TOPS Pro 包装设计软件的模拟分析，提出采用小包装三边等长、中包装内装12 盒的新液态奶品包装设计 方案。根据与市场销售的两种同类容积的液态奶包装比较发现，无论是在节省包装材料方面，还是在降低 仓储与运输成本方面，新的包装设计方案均为最佳，其中，小包装节省材料最高可达14.54%，中包装用料 可节省26.75% ，运输能力也提高1.99%。 关键词：包装优化设计，液态奶品包装，TOPS Pro 软件 Research on the Application of TOPS Pro Software in Package Design Optimization for Liquid Milk WANG Ying,, KONG Fan-di, LIU Mei-hua, Wen Rui, Ji Hongwei (Department of Mechanical Engineering, Tianjin University of Commerce, Tianjin 300134 ,China) Abstract:The non-bacteria processing technique of packing liquid milk with a brick shaped carton is very popular for its convenience in taking along, high quality and long storage period. However, higher relative packing price is the problem to be concerned. Considering about reduction in packing material, according to mathematics calculations and the TOPS Pro’s simulation analysis, this paper tries to propose a new package design for liquid milk, that is, p rimary p ackage with three length-equaled sides and intermediate package with 12 small ones in it each. The new design is better in both saving of packing material and decrease in the storage and transportation cost compared with the other two with the same volume now used in the market. The small-sized bags can save material by 14.54% at the most, the middle-sized 26.75%, and there is an increase by 1.99% in the transportation capability. Key Words: Package design optimization, Package for liquid milk, TOPS Pro software 0 前言 如果说，乳品的市场促进了乳品的包装设计，那么，乳品包装设计的发展也促进了乳品 市场的发展。乳品包装设计是乳品包装的核心环节。乳品包装主要分为液态奶包装、固态奶 包装及外包装箱三大类，由于应用领域不同，包装形式及发展趋势各有特色。液态奶制品是 [1] 乳制品市场最主要的品种，消费层次最广，引导了乳品市场的