孵化箱总程序.docVIP

孵化箱总程序 #includereg51.h #include intrins.h #define uchar unsigned char #define uint unsigned int uchar second,minute,hour; uchar a=0; sbit fs=P3^4; sbit DQ =P3^0; //定义通信端口 sbit dzs=P1^0; sbit buzzer=P1^1; uchar code LEDTab[]={0x3f,0x06,0x5b,0x4f,0x66,0x6d,0x7d,0x07,0x7f,0x6f,0x77}; //延时函数 unsigned char table[]={0x3f,0x06,0x5b,0x4f,0x66, 0x6d,0x7d,0x07,0x7f,0x6f, 0x40,0x00}; //共阴数码管 0-9 - unsigned char table1[]={0xbf,0x86,0xdb,0xcf,0xe6, 0xed,0xfd,0x87,0xff,0xef, 0xc0,0x80};//带小数点的共阴数码管 signed char shangxian=40; //上限报警温度，默认值为38 unsigned int t=0; unsigned