油罐绝热工程施工方案Oil Tank Insulation Construction Plan.doc

油罐绝热工程施工方案 Oil Tank Insulation Construction Plan 工程概况 本工程承接了XX TANK十台罐的保温工作，总保温面积是15372㎡。 工程量大、HSE要求高、管理程序多，质量要求严格。 Large quantity, high requirements of HSE, with many management procedure and strict quality requirements. 本工程计划于xx年6月底完工，由于工程的安装区域较分散，而且工程施工期正属五六月份多雨季节还要受四五月份雨季和台风的影响，造成工期短而任务非常艰巨。 According to schedule, this project shall be completed by the end of June, xx. Due to scattering jobsite, also the rain season and Typhoon of April and May impacts, construction period is very limited. All reasons above caused big difficulty of completion. 工程执行的主要标准及验收规范 Application Standards and Acceptance Specification GBJ 126-89工业设备及管道绝热工程施工及验收规范 Industrial Equxxment and Pxxing Insulation Project Construction and Acceptance GB 50264-97工业设备及管道绝热工程设计规范 Industrial Equxxment and Pxxing Insulation Project Design Specification SH3010-2000石化工业设备和管道保温技术规格 Petrochemical Industrial Equxxment and Pxxing Insulation Technical Code GB50l85-93工业设备及管道绝热工程质量检验评定标准 Industrial Equxxment and Pxxing Insulation Project Quality Test and Assessment XX文件 XX Documents XX 30.46.00.31-XX， xx罐区FIBAROLL/FIBAGEL施工规范 Intermediate and Products Tank FIBAROLL/FIBAGEL Construction Practice 施工图纸（见附件） Construction Drawing 施工技术方案Construction Technical Plan 施工准备 Preparation 根据施工图纸、设计文件和相关施工规范，编制施工方案、程序、指导施工的工艺卡等技术文件； Develop construction Plan, Procedure, Process Cards and other relevant technical documents based on Construction Drawings, Engineering Documents and relevant specification. 编制质量管理程序，细化储罐工程的质量标准，并准备相关质量文件和记录文件； Compile quality management procedure, specify storage tank quality standards and prepare relevant quality control documents and records. 参照XX工地的要求编制安全管理程序 Make safety Management according to XX site requirements. 会同设计单位和监理公司共同进行图纸会审； Carry out Drawings verification with Design Unit and Supervision Company. 组织施工人员熟悉施工图纸，进行技术交底，务必做到让所有参与施工人员对整体施工过程和自身职责、技术要求有明确、清晰的了解； Organize technician to get familiar with construction drawings, and technical requirements. Mak