可调时钟闹钟.docVIP

可调时钟闹钟 #includereg52.h #includemath.h #includeabsacc.h #includeds1302.h //DS1302驱动程序 #includeLCD_1602A.h //LCD1302驱动程序 //========================== #define uchar unsigned char #define uint unsigned int //========================== sbit k1=P1^3; sbit k2=P1^5; sbit k3=P1^1; sbit beep=P3^7; uchar key1; uchar tab_time[8]={0,0,10,0,0,10,0,1}; //时间 uchar tab_ymdw[12]={2,0,0,2,11,0,0,11,0,2,12,0}; //年月日星期 uchar tab_num[]=0123456789:/ ; uchar tab_week[21]=MonTeuWedThuFriSatSun; uchar tab_ap[]=AMPM; uchar tab_t[]=T:,tab_d[]=D:, alarm_time[]={0,15,7}; //-------------------------- //------- 函数声明 -------- void lcd_disp(); void trans(); void key(); void delay(uint); void display_set(uchar ,uchar ,uchar ); void music(); void display_char1(uchar ,uchar ); void display_char2(uchar ,uchar ); //========================== //------ 主函数 ----------- void main() { //ds1302_init(); //DS1302初始化 write_command(0x01); //LCD清屏 initial_lcd(); delay(10);//LCD1602初始化 while(1) { ds1302(); key(); trans(); if(!key1) lcd_disp(); if(tab_1302[0]==alarm_time[0]tab_1302[1]==alarm_time[1]tab_1302[2]==alarm_time[2]) music(); } } //=============显示函数============ void display_char2(uchar adr,uchar dat) { write_command(0x80+0x40+adr); write_data(dat); } void display_char1(uchar adr,uchar dat) { write_command(0x80+adr); write_data(dat); } //=============音乐播放=========================== void music() { uint ul,n,p=20; while(p--) { for( ul=0;ul150;ul++) { for( n=0;n30;n++); beep=~beep; } delay(200); for(ul=0;ul150;ul++) { for(n=0;n30;n++); beep=~beep; } delay(800); } } //==================设定显示函数========================= void display_set(uchar p,uchar adr,uchar dat) { uchar shi,ge,i,j; shi=dat/10; ge=dat%10;//分离date的十位和个位数 if(p==1adr==13) {write_command( 0xc0+13); for(i=0;i3;i++) { //星期 j=ge; //星期 write_data(tab_week[(j-1)*3+i]); }