c语言时钟.docVIP

c语言时钟 本文由johnette贡献 时钟原理 #include ds1302.h unsigned char time_buf1[8] = {20,10,6,5,12,55,00,6};//空年月日时分秒周 unsigned char time_buf[8] ; //空年月日时分秒周 /*------------------------------------------------ 向DS1302写入一字节数据 ------------------------------------------------*/ void Ds1302_Write_Byte(unsigned char addr, unsigned char d) { unsigned char i; RST_SET; //写入目标地址：addr addr = addr 0xFE; //最低位置零 for (i = 0; i 8; i ++) { if (addr 0x01) { IO_SET; } else { IO_CLR; } SCK_SET; SCK_CLR; addr = addr 1; } //写入数据：d for (i = 0; i 8; i ++) { if (d 0x01) { IO_SET; } else { IO_CLR; } SCK_SET; SCK_CLR; d = d 1; } RST_CLR;//停止DS1302总线 } /*------------------------------------------------ 从DS1302读出一字节数据 ------------------------------------------------*/ unsigned char Ds1302_Read_Byte(unsigned char addr) { unsigned char i; unsigned char temp; RST_SET; //写入目标地址：addr addr = addr | 0x01;//最低位置高 for (i = 0; i 8; i ++) { if (addr 0x01) { IO_SET; } else { IO_CLR; } SCK_SET; SCK_CLR; addr = addr 1; } //输出数据：temp for (i = 0; i 8; i ++) { temp = temp 1; if (IO_R) { temp |= 0x80; } else { temp = 0x7F; } SCK_SET; SCK_CLR; } RST_CLR;//停止DS1302总线 return temp; } /*------------------------------------------------ 向DS1302写入时钟数据 ------------------------------------------------*/ void Ds1302_Write_Time(void) { unsigned char i,tmp; for(i=0;i8;i++) { //BCD处理 tmp=time_buf1[i]/10; time_buf[i]=time_buf1[i]%10; time_buf[i]=time_buf[i]+tmp*16; } Ds1302_Write_Byte(ds1302_control_add,0x00);//关闭写保护 Ds1302_Write_Byte(ds1302_sec_add,0x80);//暂停 //Ds1302_Write_Byte(ds1302_charger_add,0xa9);//涓流充电 Ds1302_Write_Byte(ds1302_year_add,time_buf[1]);//年 Ds1302_Write_Byte(ds1302_month_add,time_buf[2]);//月 Ds1302_Write_Byte(ds1302_date_add,time_buf[3]);//日 Ds1302_Write_Byte(ds1302_day_add,time_buf[7]);//周 Ds1302_Write_Byte(ds1302_hr_add,time_buf[4]);//时 Ds1302_Write_Byte(ds1302_min_add,time_buf[5]);//分 Ds1302_Write_Byte(ds1302_sec_add,time_buf[6]);//秒 Ds1302_Write_Byte(ds1302_day_add,time_buf[7]);/