ST TLUX385A 200 W 4路LED驱动解决方案.docxVIP

ST TLUX385A 200 W 4路LED驱动解决方案ST公司的TLUX385A是用于照明和电源转换的数字控制器,具有六个可编PWM发生器,96MHz PLL和DALI,它的心脏是状态机驱动(SMED),能工作于六个单独配置的PWM时钟,最大分辨率1.3ns,用来驱动多个LED串,功率因素修正,大功率调光LED的半桥谐振转换器和HID灯镇流器的全桥控制器.本文介绍了TLUX385A主要特性,框图, STLUX385A SEMD架构主要特性和框图,以及200W数字4路LED评估板STEVAL-ILL057V1主要特性,电路图和材料清单,PCB设计图.Digital controller for lighting and power conversion applications with 6 programmable PWM generators, 96 MHz PLL, DALIThe STLUX385A device is part of the STLUX? family of STMicroelectronics? digital devices tailored for lighting and power conversion applications. The STLUX385A has been successfully integrated in a wide range of architectures and applications, starting from simple buck converters for driving multiple LED strings, boost for power factor corrections, half-bridge resonant converters for high power dimmable LED strings and up to full bridge controllers for HID lamp ballasts.The heart of the STLUX385A device is the SMED (state machine event driven) technology which allows the device to operate six independently configurable PWM clocks with a maximum resolution of 1.3 ns. A SMED is a powerful autonomous state machine, which is programmed to react to both external and internal events and may evolve without any software intervention. The SMED reaction time can be as low as 10.4 ns, giving the STLUX385A the ability of operating in time critical applications. The SMED offers superior performance when compared to traditional, timer based, PWM generators.Each SMED is configured via the STLUX385A internal microcontroller. The integrated controller extends the STLUX385A reliability and guarantees more than 15 years of both operating lifetime and memory data retention for program and data memory after cycling.A set of dedicated peripherals complete the STLUX385A: 4 analog comparators with configurable references and 50 ns max. propagation delay. It is ideal to implement zero current detection algorithms or detect current peaks.10-bit ADC with configurable op amp and 8-channel sequencer. DALI