单片机常用的宏及硬件端口命名.doc

//常用的宏及硬件端口命名 config.c //************************************** #ifndef _CONF_ #define _CONF_ /* ************************************ MCU=1 Keil C51 8051MCU MCU=2 MPLAB IDE PICMCU ********************************** */ #define MCU 1 //*************************************** #if MCU==1 #includereg51.h #define PA P0 #define PB P1 #define PC P2 #define PD P3 #define TABROM code #endif //------------------------------------------------------ #if MCU==2 #includePIC.h #define TABROM const /*简化端口符号名 */ #define PA PORTA #define PB PORTB #define PC PORTC #define PD PORTD #define PE PORTE /* RA0=PA,0 ... RA7=PA,7 RB0=PB,0 ... RB7=PB,0 RC0=PC,0 ... RC7=PC,7 RD0=PD,0 ... RD7=PD,0 */ #define TA TRISA #define TB TRISB #define TC TRISC #define TD TRISD #define TE TRISE #endif //******************************* bit sys; //系统标志位 //****************************** typedef unsigned char uchar; typedef unsigned char Uchar; typedef unsigned char UCHAR; typedef unsigned char byte; typedef unsigned char BYTE; typedef unsigned char byt; typedef unsigned char BYT; typedef signed char sbyte; typedef signed char SBYTE; //------------------------------------------------- typedef unsigned int uint; typedef unsigned int Uint; typedef unsigned int UINT; typedef unsigned int wbyte; typedef unsigned int WBYTE; typedef unsigned int Wbyte; typedef unsigned int wbyt; typedef unsigned int word; typedef unsigned int WORD; //------------------------------------------------- typedef unsigned long Dword; typedef unsigned long DWORD; typedef unsigned long ulong; typedef unsigned long Ulong; //---------------------------------------------------- typedef bit bool; typedef bit BOOL; //*********************************** #define LOW(w) ((BYTE)(w)) #define HIGH(w) ((BYTE)(((WORD)(w)8)0XFF)) /*某位置1 清0 */ #define BSET(BIT) BIT=1 #define BCLR(BIT) BIT=0 #define TESTB(b,offset) (1((b)(offset))) #define SETB(b,offset) ((b)|=(1(offset))) #define CLRB(b,offset)