路宝变速器前壳体工艺规程及典型工序夹具设计【毕业论文+CAD图纸全套】.doc

摘 要 本文介绍了路宝变速器前壳体工艺规程及典型工序夹具设计。综述了目前国内外微型车变速器壳体的制造技术及发展趋势。通过对变速器壳体的工作条件、结构、技术要求的了解，对变速器前壳体进行加工工艺编制。本文介绍了夹具设计的相关知识，并提出了在夹具设计中应注意的问题和应遵守的原则。在对国内外夹具的设计现状进行分析的基础上，针对中小企业广泛使用夹具常出现的情况，我们有必要对夹具进行设计，具有现代机床夹具设计的相关知识，这样可有效地提高夹具设计的速度和质量，从而提高企业效益。 关键词：路宝变速器前壳体；工艺规程；典型夹具设计；AutoCAD ；二维图 ABSTRACT This paper introduces the Process Procedure Planning and the Design of Fixture for the Transmission’s Frontal Shell of Lobo. The paper also tells the advanced making technology at present for the shells of transmissions. Realizing working conditions, configuration and technical requirements of the shells of transmissions, this paper weaved the processing technology for the shell in front of the transmission. The paper also introduces some knowledge about clamp designing and advances some important questions in the clamp designing. In the domestic and international fixture design for the analysis of the status quo, based on extensive use of the regular fixture. We need to design fixture with modern design knowledge. This will effectively increase the speed fixture design and quality, thereby improving enterprise efficiency Key words：Transmission frontal shell of Lobo； Process planning； A typical fixture design；AutoCAD；two-dimensional diagram 目 录 摘要………………………………………………………………………………………Ⅰ Abstract ………………………………………………………………………………Ⅱ 第1章 绪论………………………………………………………………………………1 1.1选题背景…………………………………………………………………………1 1.2变速器生产中的先进制造技术……………………………………………………3 1.2.1先进加工技术……………………………………………………………3 1.2.2先进生产模式………………………………………………………………4 1.3选题的目的和意义…………………………………………………………………4 1.4课题研究的主要内容………………………………………………………………5 1.5课题研究的主要方法………………………………………………………………5 第2章 路宝变速器前壳体的加工工艺编制………………………………………7 2.1概述………………………………………………………………………………7 2.2路宝变速器前壳体的加工工艺编制………………………………………………8 2.2.1定位基准的选择……………………………………………………………8 2.2.2加工工序的安排…………………………………………………………10 2.2.3加工工艺过程……………………………………………………………10 2.2.4工艺流程设计的方案论证………………………………………………11 2.3工艺计算…………………………………………………………………………12 2.3.1机械加工余量工序尺寸及毛坯尺寸确定……………………………12 2.3.2确定切削