双周边传动自吸式吸泥机设计【毕业论文+CAD图纸全套】.doc

摘　要 双周边传动自吸式吸泥机，是城市水厂、城镇污水处理厂常用的沉淀池吸泥设备。 采用中间进水和排泥，周边排水，保证水流均匀。利用液位差自吸式排泥，有浮渣刮集排除装置和过载保护装置。 其主要由驱动机构、主梁、中心旋转支座、导流筒、刮泥系统、排渣斗及冲洗机构、铰接式刮渣耙、撇渣板、撇渣斗、浮渣挡板、控制箱等部件组成。 污水从池中心的进水管经导流筒扩散后，均匀地向周边呈辐射状流出，呈悬浮状的污泥经沉淀后沉积于池底，上清液通过溢流堰板由出水槽排出池外，污泥刮板由池周刮向中心集泥槽，依靠池内水压通过排泥管排出池外。主梁在周边驱动装置的带动下，以中心旋转支座为轴心沿池顶以2.0m/min线速度行驶，主梁下部连接支架、污泥刮泥板等。近液面处设置浮渣刮板，沿中心稳流筒延伸至铰链式刮渣耙，当主梁旋转时，浮渣刮板将液面的浮渣由池中心撇向池周，收集在铰链式刮渣耙区内，收集的浮渣随主机在池周运动至撇渣斗，通过刮渣耙的铰链活动刮至撇渣斗内，排至池外。 关键词：中心；渣斗；浮渣；主梁；周边。 Abstract Pair of periphery drive attracts mud machine from attracting style ， is that city water works ， precipitayion of city and town sewage treatment factory in common use pool attract mud equipment.Adopt centre to water-entering and to arrange the mud， the periphery draining away water ， ensures that streams is homogeneous. The style making use of liquid to dispatch self to suck arranges a mud， has tailing to shave collection removing the device and overload protection. The person shaves the residue rake mainly from driving organization ， main beam ， centre revolution abutment ， flow-guiding tube ， shaving mud system ， arranging the residue dipper and washing organization ， hinge joint style ， skimming plate ， drossing fight against， tailing baffle plate， control casing and so on component made up of.Foul water diffuses the queen from pool centre water inlet after flow-guiding tube ， assume the form of radiation outflow homogeneously to the periphery ， assume suspension shape sludge going through the precipitayion queen deposition Yu Chi bottom， besides upper clear liquid discharges pool by the fact that the flooding weir board reason puts up a water channel， the sludge drawing strickle shaves from pool cycle to centre collection mud slot ， depend on pool inner water pressure to be in charge of the outside discharging pool by arranging a mud. Under main beam spurring on in periphery driving device， take the centre revolution abutment as the axle centre run along the pool top with 2.0 m/min linear speed， the main beam links a hold