蜂鸣器 FDC-090055F-01527R5.5(A16).docVIP

SPECIFICATION FOR APPROVAL 承 认 书 Description : Magnetic Buzzer Vender’s Part No. : FDC-090055F-01527R5.5 Customer’s. Part No. : Serial No. : FDM-2569 Version No. : 1.1 CUSTOMER’S APPROVED SIGNATURE Add: ZhenLu Industry Area Wujin Changzhou(常州市武进郑陆工业园区). TEL: 0519FAX: 0519MobileE-Mail: xiaocheng.yao@163.com Approved By Checked By Made By Zhu 2015-8-28 A. SCOPE This specification applies magnetic buzzer, FDC-090055F-01527R5.5 B. SPECIFICATION No. Item Unit Specification Condition 1 Oscillation Frequency Hz 2700 Vo-p=1/2duty , square wave 2 Operating Voltage Vo-p 1 ~ 2 3 Rated Voltage Vo-p 1.5 4 Current Consumption mA MAX.70 at Rated Voltage 5 Sound Pressure Level dB MIN. 80 at 10cm at Rated Voltage 6 Coil Resistance Ω 5.5±1 7 Operating Temperature ℃ -20 ~ +70 8 Storage Temperature ℃ -30 ~ +80 9 Dimension mm Φ9.0 x H5.5 See appearance drawing 10 Weight (MAX) gram 0.6 11 Housing Material PPO( Black ) 12 Leading Pin Tin Plated Brass(Sn) See appearance drawing 13 Environmental Protection Regulation RoHS C. APPEARANCE DRAWING Tol : ± 0.5 Unit: mm  D.TESTING METHOD Standard Measurement conditions Temperature:25±2℃ Humidity:45-65% Acoustic Characteristics: The oscillation frequency, current consumption and sound pressure are measured by the measuring instruments shown below(Recommend Driving Circuit) In the measuring test, buzzer is placed as follows: E. Typical Frequency Response Curve F. RELIABILITY TEST NO. ITEM TEST CONDITION AND REQUIREMENT 1 High Temperature Test (Storage) After being placed in a chamber with 80(2oC for 96 hours and then being placed in normal condition for 2 hours. Allowable variation of SPL after test: (10dB. 2 Low Temperature Test (Storage) After being Placed in a chamber with -30(2oC for 96 hours and then being placed in normal conditi