唐斌-数字信号处理课件-dsp试题+答案.docVIP

1. Consider the system show in the following Figure: T Let: , and the system function of digital filter is (1). What is the maximum value of T that will avoid aliasing in the C/D converter? (2). Sketch the frequency response magnitude curve of this digital filter. (3). Is this digital filter a generalized linear phase filter? If yes, which type is it? and draw the linear phase form implementation of this digital filter. If not, justify your answer. (4). If , sketch . (5). If , determine . (6). Draw the diagram of the equivalent system based on inter-changing of filtering and down-sampling. 2. In the system of follow figure : 4 , and Find the relationship of the signal and the signal 3. The three order stable and causal Butterworh analogy low-pass filter has system function: (where is the analogy cut frequency). (1). Design a three order Butterworh digital high-pass filter using the bilinear transformation method, where the sampling frequency,the pass-band frequency 。 (2). Sketch the frequency response magnitude of this digital filter. R L C 4. Consider the analog filter in follow, suppose sampling period is T=2. (1). Design a digital filter by the bilinear transformation method； (2). Draw the signal flow graph of this digital filter； 5. The causal prototype analog filter in follow (T=1): (1). The Low-pass digital filter designed by the Impulse Invariance method, and its ROC.(2). Draw the direct form signal flow graph. 6. A FIR linear-phase filter was designed by the rectangular window, the ideal system frequency response is: (1). Determine the impulse response when M=4; (2). Draw a signal flow graph of “linear-phase” realizatio