增加新EMAIL设置功能.docVIP

1、增加新EMAIL设置功能 #define NET_DVR_GET_EMAILPARACFG 250 //Get EMAIL parameters #define NET_DVR_SET_EMAILPARACFG 251 //Setup EMAIL parameters typedef struct tagEMAILCFG { /* 12 bytes */ DWORD dwSize; char sUserName[32]; char sPassWord[32]; char sFromName[32]; /* Sender */ char sFromAddr[48]; /* Sender address *///字符串中的第一个字符和最后一个字符不能是@,并且字符串中要有@字符 char sToName1[32]; /* Receiver1 */ char sToName2[32]; /* Receiver2 */ char sToAddr1[48]; /* Receiver address1 */ char sToAddr2[48]; /* Receiver address2 */ char sEmailServer[32]; /* Email server address */ BYTE byServerType; /* Email server type: 0-SMTP*/ BYTE byUseAuthen; /* Email server authentication method: 1-enable, 0-disable */ BYTE byAttachment; /* enable attachment */ BYTE byMailinterval; /* mail interval 0-2s, 1-3s, 2-4s. 3-5s*/ } NET_DVR_EMAILCFG, *LPNET_DVR_EMAILCFG; 2、增加一组事件触发的压缩参数 #define NET_DVR_GET_EVENTCOMPCFG 132 //获取事件触发录像参数 #define NET_DVR_SET_EVENTCOMPCFG 133 //设置事件触发录像参数 typedef struct tagCOMPRESSIONCFG { DWORD dwSize; NET_DVR_COMPRESSION_INFO struRecordPara; //事件触发录像 NET_DVR_COMPRESSION_INFO struNetPara; //保留 }NET_DVR_COMPRESSIONCFG,*LPNET_DVR_COMPRESSIONCFG; 3、NTP、DDNS、DNS设置 // NET_DVR_NETAPPCFG结构 #define NET_DVR_GET_NETAPPCFG 222 //获取网络应用参数 NTP/DDNS/EMAIL #define NET_DVR_SET_NETAPPCFG 223 //设置网络应用参数 NTP/DDNS/EMAIL typedef struct tagNTPPARA{ BYTE sNTPServer[64]; /* Domain Name or IP addr of NTP server */ WORD wInterval; /* adjust time interval(hours) */ BYTE byEnableNTP; /* enable NPT client 0-no，1-yes*/ signed char cTimeDifferenceH; /* 与国际标准时间的时差 -12 ... +13 */ signed char cTimeDifferenceM; BYTE res[11]; }NET_DVR_NTPPARA, *LPNET_DVR_NTPPARA; typedef struct tagDDNSPARA{ BYTE sUsername[NAME_LEN]; /* DDNS账号用户名/密码 */ BYTE sPassword[PASSWD_LEN]; BYTE sDomainName[64]; /* 域名 */ BYTE byEnableDDNS; /*是否应用 0-否，1-是*/ BYTE res[15]; }NET_DVR_DDNSPARA, *LPNET_DVR_DDNSPARA; typedef struct tagNETAPPCFG{ DWORD dwSize; char sDNSIp[16]