精选Pro-E超级技巧 -ProE学习-CAD制图教程网.doc

Pro-E超级技巧 -ProE学习-CAD制图教程网 Pro/E super skills -ProE learning -CAD drawing tutorial, home page plastic mold, plastic raw materials, plastic additives, plastic processing, ProE learning, SolidWorks tutorials, CATIA, V5 tutorial ProE - text learning Pro/E super skills Author: Source: hot mold Last part: Application Research of virtual assembly technology based on Pro/ENGINEER system Next part: Pro/MECHANICA solution The type and read order of the PRO/E configuration file The type of configuration file for PRO/E is divided from the suffix, mainly config.pro and config.sup two, in which config.pro Is a generic type of configuration file, and config.sup is a protected system configuration file, that is, a mandatory configuration File, if there is any other file in the configuration file and the conflict in this file, the configuration in this file should prevail For example, configure the following items in config.sup: Save_drawing_picture_file yes In other config.pro settings Save_drawing_picture_file no In the config.sup setting, that is, when you save the drawing, save the drawing file as a picture file. The PRO/E configuration files are read in the following order: 1. when you start PRO/E, the first file you read is the config.sup file in the TEXT folder under the PRO/E installation directory Piece, that is, the mandatory file we mentioned earlier, which is generally used for enterprise enforcement standards The. For example, PRO/E installed in the C drive, it is generally: C:\program files\proe2000i2\text\config.sup The 2. and second step reads the config.pro file in the TEXT folder under the PRO/E installation directory. You can use this The path to the file settings library directory. The 3. and third step is to read the config.pro file in the local directory, which is called the local directory, which is convenient for the work You can use this file to start PRO/E from multiple different work directories at the start level directory of the startup directory. For