P-短窑设计特点.pdfVIP

Design Characteristics of the PYRORAPID® Short Rotary Kiln ® PYRORAPID 两支撑短窑的设计特点 Abstract- 摘要 The benefits offered by the short kiln from the point of view of the designer are outlined by comparing ® ® a standard preheater kiln (PYROCLON -R) with a PYRORAPID short rotary kiln each designed for a production capacity of 2800t/d. ® ® 笔者通过生产能力均为日产 2800 吨的普通预热器(PYROCLON -R)窑和 PYRORAPID 短窑进 行比较，阐述短窑的一些特点。 The major advantage of the short rotary kiln is that it is a statically defined system. This means that overload conditions which may occur for standard kilns carried on three roller stations, e.g. as a result of foundation subsiding and/or kiln tube warping, are eliminated for short rotary kilns. Therefore, when dimensioning kilns with reference to identical maximum admissible specific loads, the short kiln features markedly greater safety margins with respect to wear and fracture. 短窑的主要特点是静态组合系统。也就是说普通三支撑窑可能发生基础沉降和/或窑筒体弯曲 造成的过负荷情况，短窑完全不会出现。因此，从窑最大单位荷载方面，短窑抗磨损和破裂的 安全系数明显增大。 The conclusive results obtained when comparing pier loadings, speeds, drivers, weights and design ® details round off the overall positive outcome in favour of the short rotary kiln PYRORAPID . 通过对窑墩荷载、窑速、窑传动、窑重量及其设计方面的全面比较，短窑 PYRORAPID® 确实 有许多优点。现介绍如下： 1. Introduction 简介 Formerly long rotary kilns operated by the wet or dry process and were equipped with 6-roller station or more and as general practice for the manufacture of cement. 较早水泥湿法和或干法长窑一般带有6 组托轮或更多。 Since the introduction of cyclone preheaters the kiln with three roller stations has taken a le