噪声监测C程序.docVIP

整个程序分为2部分，主体为噪声监测，另外有1602显示驱动 （一）1602.c /****************************************************************** 文件名:lcd1602 简要描述: lcd初始化：void lcd_init() lcd写指令：void lcd_w_cmd(uchar cmd) lcd写数据：void lcd_w_data(uchar dat) lcd显示位置设置：void lcd_show_set(uchar num) 编写者： 修改记录： *******************************************************************/ #include reg52.h #include intrins.h #include lcd1602.h #define uint unsigned int #define uchar unsigned char sbit lcden=P1^7; sbit lcdwr=P1^6; sbit lcdrs=P1^5; uchar lcd_busy() { uchar result; lcdrs = 0; lcdwr = 1; _nop_(); lcden = 1; _nop_(); result = (uchar)(P0 0x80); lcden = 0; return result; } void lcd_w_cmd(uchar cmd) { while(lcd_busy()); lcdrs=0; lcdwr=0; lcden=0; P0=cmd; _nop_(); lcden=1; _nop_(); lcden=0; lcdrs=1; } void lcd_w_data(uchar dat) { while(lcd_busy()); lcdrs=1; lcdwr=0; lcden=0; P0=dat; _nop_(); lcden=1; _nop_(); lcden=0; lcdrs=1; } void lcd_show_set(uchar num) { lcd_w_cmd(0x80|num);//0-27H,40H-67H } void lcd_init() { lcd_w_cmd(0x38); _nop_(); lcd_w_cmd(0x0f); _nop_(); lcd_w_cmd(0x06); _nop_(); lcd_w_cmd(0x01); _nop_(); } (二)噪声监测 Noise.c #include reg52.h #include lcd1602.h #include alldelay.h typedef unsigned char uchar; typedef unsigned char uint; ////////////////////////////////////////////////////////////////////////////////////////////////////////// unsigned char welcome[]={welcome!}; unsigned char Show0[6]={Noise:}; unsigned char Show1[5]={dB}; unsigned int code Countnum[66]={11, 13, 15, 17, 19, 22, 24, 27, 31, 34, 39, 44, 49, 55, 62, 69, 78, 87, 98, 110, 123, 138, 155, 174, 195, 219, 246, 276, 309, 347, 390, 438, 491, 550, 618, 693, 778, 873, 979, 1099, 1233,1383,1552,1742,1954,2193