HOLITA SPCM-APD specification V100精选.pdfVIP

Photon detection specification HOLITA SPCM-APD Single Photon Counting Module Count Series Description HOLITA’ newly improved SPCM-APD series Single Photon Counting Module APD operated in the Geiger mode, are used to detect single photos over the wavelength range of 350nm to 1060nm. The SPCM-APD series has been developed to offer a unique combination of high quantum efficiency, wide dynamic range and ease of use for photon counting applications. A TTL-level pulse is generated for each photon detected and the signal is available over the RF wire with SMB male connector at the rear of the Key Feature module. The signal should be terminated into 50Ω. The gating function allows  Low dark count rates the module to be disabled between measurements to provide protection  Peak PDE: against accidental overload.  50% @410nm  60% @532nm The photodiode is both thermoelectrically cooled and temperature  65% @830nm controlled, ensuring stabilized performance despite ambient temperature  32 MC/S dynamic range changes. Operating temperature range has been increased and t