毕业设计（论文）--马达后罩模具设计及三维数控加工程序设计.docVIP

毕业设计（论文） 设计题目：马达后罩模具设计及三维数控加工程序设计 ? ? 姓名 学 号 xxxxxxxxxx 院 （系） xxxxx 专 业 机械设计与制造 摘 要 随着CAD/CAM、曲面造型加工与快速成型等先进制造技术的不断发展，以及这些技术在模具和数控加工行业中的普及应用，模具设计制造与数控加工领域正发生着一场深刻的技术革命，传统的二维设计及模拟量加工方式正逐步背基于三维数字化定义的数字化制造方式所取代。在这场技术革命中，逐步掌握三维CAD/CAM软件的使用，并用于模具的数字化设计和三维数控加工是其中的关键。 本文介绍了基于反求工程的马达后罩实体的曲面造型和利用Mastercam软件对其进行三维数控加工程序设计的全过程。对于了解基于CAD/CAM技术的制造过程有着参考意义。 本文给出了马达后罩实体的曲面造型和进行三维数控加工程序设计的详细步骤，最后给出了程序结果和在Mastercam软件中进行进行仿真加工演示的文件，使读者对论文的了解更加直观。 关键词：逆向工程;曲面造型;数控 Abstract Along with CAD/CAM, the surface modeling processing and fast takes shape and so on the advanced manufacture technology unceasing development, as well as these technologies in the mold and in the numerical control processing profession popularization application, the mold design manufacture and the numerical control processing domain are having a profound technological revolution, the traditional two-dimensional design and the simulation quantity processing way gradually are carrying based on the three dimensional digitized definition digitized manufacture way substitute. In this technological revolution, gradually grasps three dimensional CAD/CAM software the use, and used in the mold digitized design and the three dimensional numerical control processing is key . This article introduced after self-examined the project motor to cover the entity the surface modeling and carries on the three dimensional numerical control processing programming using Master CAM software to it the entire process. Has reference significance. this article regarding the understanding after the CAD/CAM technology manufacture process to produce the motor to cover the entity the surface modeling and carries on three dimensional numerical control processing programming the detailed step, finally has produced the procedure result and in MasterCAM software carries on the simulation processing demonstration the document, causes the reader to the paper an