海泰克(Hitech)PWS6600安装和操作手册[英文版].pdfVIP

PWS6600 Installation and Operation manual MAEN849 2006-12 English PWS6600 Installation 1 PWS6600 Installation 1.1 Introduction PWS6600 is a Human Machine Interface (HMI) with a 10.4” TFT Liquid Crystal Display, and is water- and dust-resistant according to IP65/NEMA4. The HMI is CE-marked and meets your need to be highly transient-resistant while in operation. Also, its compact design makes connections with other machinery more flexible, thus achieving the optimal performance of your machines. ADP is used to design applications of the HMI; it is reliable, user-friendly and com- patible with many models. The latest released ADP Version 6.1 and above can be used to design applications for the HMI. 1.2 Safety Precautions Both the installer, the owner, and the operator of this HMI must read and under- stand this installation manual. General – Only qualified personnel may install or operate the HMI. – The HMI must be installed according to the installation instructions. – The HMI is designed for stationary installation on a plane surface, where the fol- lowing conditions are fulfilled: • no high explosive risks • no strong magnetic fields • no direct sunlight • no large, sudden temperature changes – Never allow fluids, metal filings or wiring debris to enter any openings in the HMI. This may cause fire or electrical shock. – The HMI fulfills the requirements of article 4 of EMC directive 89/336/EEC. – Storing the HMI where the temperature is lower/higher than recommended in this manual c