锌合金指挥盒体压铸模设计机械类.docVIP

锌合金指挥盒体压铸模设计 Zinc alloy command box body pressure molding design 摘要 本文介绍了锌合金指挥盒体压铸模设计的全部过程及压铸工艺参数的设计依据，通过全面的分析和精确的计算，设计出一套可用于生产实践的压铸模，从中得出设计方法对今后其它类型件的压铸模设计也有一定的参考价值。本压铸模的特点是四面侧抽芯，侧浇口浇注系统。通过对产品图的分析，确定方案。首先确定浇注系统，排溢系统和分型面。有几个方案中选出最适合本铸件的。此过程中考虑到避免铸件产生缺陷、提高铸件的质量的问题。然后计算型腔，型芯尺寸，进行压铸模结构的设计。再次进行推出复位机构的设计，在这些工作完成之后，要考虑的是压铸模的技术要求，其中包括总装要求和零件图要求。 目前，模具的设计特别是压铸模的设计在现代化制造行业起着越来越重要的作用，压铸是高效益、高效益，很有发展前途的铸造方法，在高科技的不断推动下，压铸必将进一步扩大其应用范围，在国民经济发展中必将发挥出越来越大的作用。与其他方法相比，它具有尺寸精度高，强度高，表面粗糙硬度高，能压铸复杂的薄壁零件，同时，生产率极高，可以省略大量的机加工。 本文分析了锌合金指挥盒体在设计过程中的工艺性和工艺方案，同时也阐述了在设计时应注意的一些原则性问题。在整个设计过程中以性能为中心，以降低成本为导向，以简化结构为基点，体现了原则性与灵活性的完美结合。 关键词：压铸模；工艺参数；工艺性 Abstract In this article, I dewell on all process of die-casting mold of command box with the Zinc alloy and choose its process variable. I design a set of paractical die-casting mold, through precious calculation and repeated reflection .Moreover ,the design way can guide other types of die-casting mold design in future. The characteristic of this die-casting model is that draw out the cores in four oppsition directions and the system of moulding adopt point of pouring channels, in the designing of that it requires the second separate model, it is a complicated structure. I can confirm the project by analysing part drewing. First, I can confirm the system of moulding and let flooding, and separate interface. In the course of this I consider the problem of avoiding the bug of casting product and improving the quality of casting. From the several projects I select the best one. Afterword I count the dimension of model sheet and core, in order to design the structure of die-casting, and then design the institution of detrusion and diaplasis. After these work completing, I design the technic require of this die-casting, general assemble and apart included. At present, the mould design especially die-casting die in the design of modern manufacturing industry plays a more and more important role is high benefit, high benefit, die-casting, promising casting