巨型钢结构起重技术及装备_WEB_v02.ppt

Strand Jacks Jack Jack support beam Multi-strand cable Very heavy load Fixed anchor housing Jack Assembly Strand Jacks Jack Jack support beam Multi-strand cable Very heavy load Fixed anchor housing Jack support beam Multi-strand cable Main (bottom) anchor Jack (top) anchor Centre hole jack Jack Components Strand Jacks Jack (top) anchor Centre hole jack Mini jacks Wedges Conical holes Strand Jacks Main (bottom) anchor Wedges Conical holes Centre hole jack Mini jacks Jack support beam Strand Jacks Jack Jack support beam Multi-strand cable Very heavy load Fixed anchor housing Jack support beam Multi-strand cable Main (bottom) anchor Jack (top) anchor Centre hole jack Jack Components Strand Jacks - Range Jack model Number of Strands Capacity (tonnes) Stroke (mm) L15 mk. 1 1 15 250 L15 mk. 2 1 15 450 L50 3 15 450 L100 7 105 300 L180 12 180 500 L300 19 29 450 L450 27 405 450 L600 37 555 450 L750 50 750 450 Strand Jacks - Strand Vitally important to strand jacks are the strands. These are 18mm diameter and are formed from seven wires. The seven wires are wound together to form a helix. After winding they are drawn through a die to compact and harden them. The resulting strand has a guaranteed ultimate tensile strength of 38 tonnes and a factor of safety of 2.5 is normally applied to this to give the safe working load of 15 tonnes. Other factors of safety have been used from 2.0 (short term load during a pulling operation) to 9.0 (inside a nuclear containment area) but 2.5 has been adopted as the industry norm. Strand Jacks – Power Packs Power packs provide the oil to the jacks and can be powered by diesel engine or electric motor. All power packs have direct, panel mounted, monitoring and control systems. Further electronic monitoring can display number of lift strokes completed and individual stoke positions at each jack. Similar control and monitoring facilities can also be positioned remote from the power pack to fully compute