防爆带挂钩成型机机械系统设计.docVIP

本 科 毕 业 论 文 设计题目： 防爆带挂钩成型机机械系统设计 摘要 在研究国内外防爆带成形机的发展状况和我国防爆带成形机械存在的问题基础上，根据零件作业的要求，设计一种利用液压传动系统为动力的防爆带成形机。成型机利用侧向冲压对挂钩部位进行弯曲加工。 防爆带广泛应用于各显像屏幕设备当中，为防止显像管爆炸,从而避免产生各种安全隐患。其防爆带成形机设计成熟、结构简单、制造成本低廉，产品应用范围广。 在防爆带成形机设计方案中，首先，根据对于防爆带带料的选择及成形工艺的分析等设计出合适的机械结构，并选择合适的加工流程；其次，针对弯曲的需要，计算各零件的力学性能，在设计该成形机的同时结合了原有的机械设计的方案，对原有的机械设计进行改进和创新。在设计中引用了CAD技术。 关键词: 防爆带成形机 传动系统 侧向冲压 弯曲加工 Abstract Research at home and abroad explosion-proof belt forming machine development and Chinas explosion-proof belt is formed on the basis of the problems exist in mechanical, according to the requirements of parts operating, design a kind of using hydraulic transmission system for the power of the explosion-proof belt forming machine. The forming machine utilizes the side stamping to carry on the bending processing to the hook. The explosion-proof zone is widely used in various imaging screens, so as to prevent the explosion of the picture tube, thus avoiding all kinds of safety hazard.. Its explosive proof belt forming machine is mature, simple in structure, low in manufacturing cost, and wide range of products.. In explosion-proof belt forming machine design, first of all, for explosion-proof belt belt material selection and forming process analysis and design of suitable mechanical structure according to and select suitable machining process; secondly, in view of the need for bending, calculate the mechanical properties of the parts and in the design of the forming machine combined with the original mechanical design scheme, to the original design of the machine for improvement and innovation. In the design, the CAD technology is cited..  Key words: explosion-proof belt forming machine hydraulic transmission system lateral stamping bending processing 1.绪论 1 §1.2 设计研究的主要内容 1 §1.2.1 研究内容 1 §1.2.2 研究方法 2 §1.2.3 技术路线 2 2. 防爆带产品的零件图 2 §2.1 产品的零件图 2 3.防爆带成形机设计原理和机构方案 5 §3.1 防爆带成形机设计原理的分析、确定 5 §3.1.1方案分析 5 §3.1.2加工过程分析 5 §3.2 防爆带成形机结构方案的分析、确定 6 4. 防爆带成形机设计的计算和结构说明 8 §4.1 弯曲