基于可重构路由器装配的构件候选集生成方法研究-电子与信息学报.PDFVIP

第 32 卷第 8 期 电 子 与 信 息 学 报 Vol.32No.8 2010 年 8 月 Journal of Electronics Information Technology Aug..2010 基于可重构路由器装配的构件候选集生成方法研究 刘 强 汪斌强 刘海成 ( 国家数字交换系统工程技术研究中心 郑州 450002) 摘 要：可重构路由器的研究与设计将冗长的网络设备生产过程变为类似于搭积木的构件装配过程。该文从构件组 装角度出发，根据可重构路由器的特点，并针对第三方厂家大量提供构件导致的构件库急剧膨胀，构件提供困难的 情况，提出了可重构路由器构件候选集 CCS (Component Candidate Set) 概念。该文针对构件静态加载和动态加 载的区别，采用神经网络分别设计了静态构件候选集生成方法和动态候选集生成方法。CCS 的提出解决了可重构 路由器构件组装过程中的自动化和智能化的问题。CCS 描述了构件运行状态、自主运行及自适应演化运行等机制， 最后给出了基于该方法生成构件候选集的仿真实验，实验验证该候选集生成方法的准确性和高效性。通过该方法在 可重构路由器中的实际运用证明该方法的实用性。 关键词：可重构路由器；构件候选集；生成方法；神经网络 中图分类号：TP393 文献标识码： A 文章编号：1009-5896(2010)08-1980-06 DOI: 10.3724/SP.J.1146.2009.01608 Research on Component Candidate Set Generation Method Based on the Component Composition of the Reconfiguration Router Unit Liu Qiang Wang Bin-qiang Liu Hai-cheng (National Digital Switching System Engineering and Technological RD Center, Zhengzhou 450002, China) Abstract: As a result of the research and design of Reconfiguration Router Unit (RRU), the producing of network equipment is turned into component composition as building block. Based on the component composition,the character of RRU, and situation that the third-party manufacturers provide components for a large number of the component library led to the rapid expansion of the difficulties of the urgent need to provide components,this paper proposes the CCS (Component Candidate Set). Based on the difference between the static load and dynamic load, the scheme of creating component candidate set is based on the neural network. The CSS is proposed to resolve the problem of automation and dynamic in the process of RRU component composition. Acc