机械制造技术课程设计-方套的机械加工工艺及铣30方槽夹具设计.docVIP

本科毕业设计(论文) 题目： 系 ： 专 业： 班 级： 学 生： 学 号： 指导教师： 2013年月 摘 要 全套图纸，加 Square Sleeve’s Machining Process And Its Fixture Design Abstract The design content mainly by mechanical processing technology, application of engineering materials, tooling and fixture design of metal cutting machine tool and so on. Fixture design process design and fixture design of the machine tool. Process analysis of machining process design of the main role of parts and components, design the billet structure. From its base and benchmark crude benchmarks choice to develop process, so as to determine the parts machining allowance and the process dimensions and cutting parameters and the basic working hours. The last part of special fixture, positioning analysis and selection of reference and cutting force and clamping force calculation and positioning error, so as to determine the positioning element to element, machine tool, clamp to link part and fixture design. This paper mainly focuses on the sets of fixture design as the center, the design and manufacturing process based on the analysis of production parts, design scheme of the fixture for processing sleeve. On the basis of reasonable design, accord with the actual engineering, 3 sets of fixture design, fixture and assembly drawings and parts drawing, completed the graduation design. Keywords：Square Sleeve, Processing technic,Fixture , Fixture design 目 录 Square Sleeve’s III 1 绪 论 1 1.1 概述 1 1.2 夹具的研究意义 1 1.3 夹具的相关研究现况 1 1.4 本课题的主要研究内容 3 2零件分析 4 2.1 零件的生产类型及生产纲领 4 2.2 零件作用分析 4 2.3 零件的工艺分析 4 2.4 确定毛坯的成形方法 5 2.5 确定锻件工艺方案 6 2.6 确定锻造工艺参数 6 3 机械加工工艺规程设计 8 3.1 基面的选择 8 3.2 确定机械加工余量及工序尺寸 11 3.3 确定切削用量及基本工时 16 4 铣30方槽夹具设计 29 4.1定位分析及基准的选择 29 4.2切削力及夹紧力的计算 29 4.3定位误差分析 30 4.4夹具设计及操作的简要说明 31 5 结 论 33 参考文献 34 致 谢 35 1 绪 论 1.1 概述 在机械加工制造过程中,用来固定加工对象,使其占有正确的位置,以便接受施工、检测的装置,都可统称为“夹具”。夹