ANSYS ICEM资料--C2-WS-2DPipeJunction.ppt

5/24/2004 2004 International ANSYS Conference July 30, 1999 ICEMCFD/AI*Environment 5.0 Hexa Workshop 1 2D Pipe Junction Create a Project Open Geometry Initialize Blocking Split to Create Topology Underlying topology is “T” shaped This concept is initially difficult for many new users, but thinking “how do I structure the blocks to get grid lines to flow the way I want?” results in better mesh than simply trying to block along the geometry Deleting Blocks Vertex to Point Association Associate Edges to Curves Displaying Associations Grouping Curves Finishing Edge to Curve Associations Move Vertices onto Geometry Mesh Sizes Compute/View Mesh Setting Edge Parameters Edge Parameters Copy to Parallel Edge Parameters Match Edges Match Edges – All Four Corners Checking Quality Improving Orthogonality – Edge Parameters Improving Orthogonality – Splitting Blocks Save Mesh Save Project Saving Files Separately Workshop ICEM CFD/AI*Environment 5.0 The pull down next to the file name can be used to quickly locate recently used projects. The Project file contains information about project settings, the working folder and file associations. After saving project, simply loading the project file will load all associated files within working directory Create the project File - New Project Browse to the working directory (2DPipeJunct) Enter the project name (2DPipeProject) Save (it will append .prj if this extension is not already there) Open geometry File - Geometry - Open Geometry Choose “geometry.tin” Open Begin blocking Select Blocking Create Block Initialize Blocks Change TYPE to 2D Planar Apply This creates one block which encloses the entire geometry Curves automatically change color (colored separately instead of by part) to allow you to see where the ends of curves are #4 #2 #3 #1 Split this edge for the vertical splits Split this edge for the horizontal split #1 #2 #3 Splitting blocks Select Split Block Split Block Left click on the edge to split The new edge