AWS.D1.1.2000 Structural Welding Code-Steel related精选.pdfVIP

AWS D1.1 Structural Welding Code: You Specify It- Do You Know What It Really Says? Wesley J. Oliphant, PE, AWS-CWI, F.SEI, F.ASCE ReliaPOLE Inspection Services Company, LLC 1 AWS D1.1 2010 Structural Welding Code - Steel “All welding shall be done in conformance with AWS D1.1” • a minimum mandatory welding requirement • for welded structures made from commonly used carbon and low alloy constructional steels (i.e. typical structural buildings). IS THAT ENOUGH FOR THE HIGH PERFORMANCE, NON- REDUNDANT, FRACTURE CRITICAL WELDING, WE REQUIRE IN A TYPICAL TUBULAR STEEL TRANSMISSION POLE DESIGN? 2 AWS D1.1 2010 Structural Welding Code - Steel Poles you purchase should be fabricated to a standard that exceeds the MINIMUM AWS D1.1 requirements. 3 AWS D1.1 2010 Structural Welding Code - Steel You have to read it to know what’s in it! Consists of (540) Pages organized into: • (8) “Clauses” (Chapters) • (9) “Normative” Annexes • (12) “Informative” Annexes • Commentary • Index 4 AWS D1.1 2010 Structural Welding Code - Steel Let’s look a the Eight Chapters called “Clauses” of AWS D1.1: Clause 1: General Requirements Basic Information on the scope and limitations of the code, Key definitions, and, Identifies