BENTONITE GEOTEXTILE WATERPROOFING SYSTEM英文资料.pdfVIP

TECHNICAL DATA VOLTEX® BENTONITE GEOTEXTILE WATERPROOFING SYSTEM DESCRIPTION higher levels of the following contaminant’s: Place VOLTEX over the properly prepared VOLTEX is a highly effective waterproofing nitrates, phosphates, chlorides, sulfates, lime substrate with the dark gray (woven) geo- composite of high strength geotextiles and and organic solvents. textile side up. Overlap all adjoining edg- 1.0 pound of sodium bentonite per square es a minimum 100 mm (4”) and stagger foot. (4.8kg/sqm) The high swelling, low per- INSTALLATION sheet ends a minimum 300 mm (12”). meable sodium bentonite is encapsulated General: Installation guidelines herein are Staple or nail edges together as required to between a non-woven and woven geotextile. for cast-in-place concrete applications. For prevent any displacement before and during A proprietary needlepunch process interlocks shotcrete, precast concrete, and other appli- concrete placement. the geotextiles together forming an extremely cations not covered herein, refer to specific strong composite that maintains the equal VOLTEX literature or contact CETCO for appli- Cut VOLTEX to closely fit around penetrations coverage of bentonite, as well as, protects cable installation guidelines. Install VOLTEX in and pile caps. Install Waterstoppage under cut it from inclement weather and construction strict accordance with the manufacturer’s in- VOLTEX edge at detailing and then apply a min- related damage. Once backfilled, VOLTEX hy- stallation guidelines using ac