带料切口连续拉深级进模具设计.doc

带料切口连续拉深级进模具设计 由于部分原因，说明书已删除大部分，完整版说明书，CAD图纸等，联系 采用普通的单工序模或复合模，故选多工位级进模具的生产工艺方案，可提高材料的利用率。经过计算分析完成该模具的，凸、凹模工作部分的设计计算，还有和零件设计Design of Continuous Drawing Progressive Die for Material with Incision Author: Tutor: (Oriental Science ＆Technology College of Hunan Agricultural University, Changsha ) Abstract：Strip continuous deep drawing process of drawing and process without incision incision drawing, process notch continuous drawing is in the first drawing, a strip of material processes a process between incision incision, such that when the first and later the drawing, the two processes of mutual influence, mutual constraint is smaller, but the relative, spend more material. According to the thin wall Wide-flange cylindrical parts production as an example, a design of progressive die, the first parts of the process analysis, there is deep drawing, punching, flanging, blanking process, each station has the size relations, because it is high yield small cylindrical deep drawing parts, generally use the strip continuous deep drawing. Using the ordinary single-operation die or compound die punching production, need to die, punch, a plurality of operating personnel can complete all processes of stamping manufacturing and product quality and the production efficiency is low. The multi-position progressive die for the production process, can improve the utilization ratio of materials and mold level of use, saving equipment. Secondly, through calculation and analysis to determine the process plan to complete the mold layout design, convex, concave die part of the design calculation, and the die structure and process design. Key words：Process analysis, Process calculation, Nesting progressive, Die Process incision. 1 前言 21世纪的制造业，正从以机器为特征的传统技术时代，向着以信息为特征的技术时代迈进，即用信息技术改造和提升传统产业。经济全球化和世界市场一体化加速发展，不断加剧了制造商之间的竞争，提出了快速反应市场的要求，与之相适应，制造业对柔性自动化技术及装备的要求更加迫切而强烈。同时，微电子技术和信息通信技术的快速发展，为柔性自动化提供了重要的技术支撑，工业装备的数控化、自动化、柔性化呈现蓬勃发展的态势。 1.1 冷冲压术的发展趋势 美国、德国、日本的汽车工业如此发达，得益于其冷冲压技术及装备的领先地位。当前的世界冷冲压技术及