机械BW320-01-01泵头机械加工工艺及工装设计.docVIP

BW320-01-01泵头机械加工工艺及工装设计 学生姓名： 学生学号： 院（系）： 机电工程系 年级专业： 机械设计制造及其自动化 指导教师： 二〇一三年三月摘 要 在机床上加工工件时，定位和夹紧的全过程称为“安装”。在机床上用来完成工件安装任务的重要工艺装备，就是各类夹具中应用最为广泛的“机床夹具”。机床夹具的种类很多，其中，使用范围最广的通用夹具，规格尺寸多已标准化，并且有专业的工厂进行生产。而广泛用于批量生产，专为某工件加工工序服务的专用夹具，则需要各制造厂根据工件加工工艺自行设计制造。本设计的主要内容是设计床夹具，需要对、3-90、3-φ100、3-φ95孔及止口进行镗削加工。 全套图纸，加 泵头零件有各种不同用途和不同精度的孔需要加工。在机械加工中，孔的加工量所占比例较大，其中钻头、扩孔钻、铰刀等定尺寸刀具加工占相当多数。这时，除了要保证孔的尺寸精度外，还要达到孔的位置精度要求。在单件小批量生产中，用划线后找正孔轴线位置方法加工。在批量生产中一般都采用钻床夹具，钻床夹具又称钻模，通过钻套引导刀具进行加工可准确地确定刀具与工件之间的相对位置。通用夹具专用夹具钻床夹具ABSTRACT In the processing machine parts, the whole process of positioning and clamping called installation”. Important process equipment in the machine to complete the workpiece installation tasks, various fixture is used most widely machine tool fixture. Many types of machine tool fixture, wherein, the use scope broadest generaljig, sizes have been standardized, and has a professional production plant. But widely uses in the volume production, special fixture designed for a workpiece processing services, requires the factory according to the workpiece processing technology to design and manufacture. The main content of this design is the design of boring jigs and fixtures of milling machine and the whole process of design, need to the plane of the base of pump head for milling and the A-A view right end 3- φ 100, φ 100 3-90, 3-, 3- φ 95 holes and the rabbet of bori Pump head parts have different uses and different precision hole needs to process. In machining process, machining orifice larger proportion, the drill, reamer, reamer, boring cutter, sizing tool processing accounted for a majority of. At this time, in addition to guarantee the hole the size precision, but also to reach the hole position accuracy requirements. In the single piece and small batch production, looking for processing hole axis location method for scribing. In the batch production in general use drilling fix