单片机复习code程序精选.doc

//8255数码管滚动显//ＡＬＥ的作用:访问片外存储器时，ＡＬＥ为有效高电平， //Ｐ０口可做外部地址锁存器的锁存信号 #includereg52.h #includeabsacc.h #define uint unsigned int #define uchar unsigned char #define PA XBYTE[0xfff8] //1111 1111 111 1000 #define PB XBYTE[0xfff9] //1111 1111 111 1001 #define COM XBYTE[0xfffb] //1111 1111 111 1011 uchar code weima[]={0x01,0x02,0x04,0x08,0x10,0x20,0x40,0x80};//共阳极 /*uchar code table[]= {0xc0,0xf9,0xa4,0xb0, 0x99,0x92,0x82,0xf8, 0x80,0x90,0x88,0x83, 0xc6,0xa1,0x86,0x8e}; //0—F */ uchar code duanma[]={0xff,0xff,0xff,0xff,0xff,0xff,0xff, 0xa4,0xc0, 0xf9, 0xa4,0xc0,0x80,0xf9,0x80, 0xff,0xff,0xff,0xff,0xff,0xff,0xff}; void delayms(uint z); void main() { uchar i,j,k; P3=0xfe; COM=0x80; while(1) { for(j=0;j10;j++) //为了延长显示时间 { for(i=0;i8;i++) { PB=weima[i]; PA=duanma[i+k]; delayms(1); } } k=(k+1)%15; //8+14=22 } } void delayms(uint z) { uchar i; while(z--) for(i=0;i120;i++); } /* //锯齿波 #includereg52.h #includeabsacc.h #define uint unsigned int #define uchar unsigned char #define DAC0832 XBYTE[0x7fff] void main() { uchar i; while(1) { for(i=0;i250;i++) DAC0832=i; } } */ /* //三角波 #includereg52.h #includeabsacc.h #define uint unsigned int #define uchar unsigned char #define DAC0832 XBYTE[0x7fff] void delayms(uint z); void main() { uchar i; while(1) { for(i=0;i250;i++) { DAC0832=i; //没有delayms()函数T=2ms delayms(1); //加了delayms()函数T=0.5s } for(i=250;i0;i--) { DAC0832=i; delayms(1); } } } void delayms(uint z) { uint x,y; for(x=120;x0;x--) for(y=z;y0;y--); } */ //梯形 #includereg52.h #includeabsacc.h #define uint unsigned int #define uchar unsigned char #define DAC0832 XBYTE[0x7fff] void delayms(uint z); void main() { uchar i; while(1) { for(i=0;i250;i++) { DAC0832=i; //没有delayms()函数T=2ms // delayms(1); //加了delayms()函数T=0.5s } DAC0832=250; //可以不用 delayms(1); for(i=250;i0;i--) { DAC0832=i; // d