剃须刀刀头注塑模具的设计与数控加工研究毕业设计（含外文翻译）.docVIP

剃须刀刀头注模设计 摘 要 由于注成型方法有其它塑料成型方法无法取代和比拟的优点，己引起人们普遍关注。注射模设计理论及方法，已经历了从经验设计到理论设计的过程。结合塑模设计的理论利用相关CAD/CAM软件，可大大的提高设计、制造的效率和质量。 本课题首先用软件的CAD功能对该的塑件进行设计，并对塑件的材料进行选型和工艺分析；然后对的注塑模的结构进行设计，注塑模结构包括：浇注系统的设计、型芯和型腔的设计、抽芯机构的设计和推出与复位机构等的设计，并用软件的CAD功能对模具结构进行三维实体设计和总体装配。利用Mastercam软件完成了模具成型零件的计算机辅助加工工艺及NC程序设计；数控加工技术是现代自动化、柔性化及数字化生产加工技术的基础与关键技术。论文完成了基于的注塑模具设计、加工工艺设计和数控加工试验的全过程。通过设计研究为企业解决了技术难题，本文提出的数控仿真加工方法对于缩短生产周期、降低产品成本、提高工件加工质量具有实际意义。关键词：；注塑模；Masteram；数控加工 Design and NC machining of the injection mold design of the cutter head of the shaver ABSTRACT Due to the injection molding method has other plastic molding methods cannot replace and advantages over, it has aroused peoples attention. Injection mould design theory and method, it has experienced from experience design to the theoreticaldesign process. Combining the design theory of plastc mould using relevant CAD/CAM software, can greatly improve the design, the manufacture efficiency and quality. First,the paper discussed the development process and the mould CAM on the developing process and manufacturing technology of the status quo, analyzed the injection mold design and process analysis principle and methods; second,Using SolidWorks studies the typical die design, design completed car of injection mold two-year mirror, completing the parting design, the design of gating system, mold temperature system design and mould assembly; The processing technology of forming parts are analyzed, Mastercam software completed by its molding part of computer aided process and NC program; And simulation verified knife processing, walk the accuracy of process documents. Nc machining technology is the modern automation, flexibility and digital production processing technology foundation and key technology. The paper based on completed complete SolidWorks of injection mold design and analysis, processing technology design and analysis and numerical control processing experiment process. Through the design research for enterprises to solve the