外文翻译---机械制造业发展形势.docxVIP

外文原文Machinery developmentsMachinery manufacturing enterprises in the production management model is changing. As the production from different backgrounds, different scale of enterprises, the quality of personnel and business leaders than different way of thinking is different from the production machinery manufacturing management model also different. Production management in China compared with developed countries. In the production concept, production, management appears to lag behind other areas. 1. look for problems and defects in Chinas machinery manufacturing enterprise production management Chinas machinery manufacturing production management mode, look for problems and defects in Chinas machinery manufacturing enterprise production management, 50 years in the 20th century on the basis of learning developed in the USSR, the production management model is the product-centric production, the production schedule for the center control the entire production, and single species (less variety) mass production to adapt the production management. The machinery manufacturing enterprises of production management in the following drawbacks: 1.1 the companys multi-power source of propulsion, the large increase in inventories. Multi-power source of propulsion. Refers to the various parts and components production stage, have their own production capacity, production speed production of parts, and then pushed to the next stage, thus progressively push down the formation of series, parallel to the push-down form a parallel until the push to the last general assembly, constitute the multi-drive propulsion. Since production is the multi-power source, the multi-drive, plus the output of each stage of production is bound to form a long and short. Long-term parts and components vent poor into the stock. To increase inventory levels, while the short-term components of supporting the assembly to form a shortage of parts. When the long longer short the more short-term, so that not