二类油层聚合物驱压裂时机的确定-大庆石油地质与开发.PDFVIP

摇 2011年8月 摇 摇 摇 摇 摇 摇 大庆石油地质与开发 Aug郾 ,2011 摇 摇 摇 摇 摇 摇 摇 摇 摇 摇 第30 卷第4 期 Petroleum Geology and Oilfield Development in Daqing摇 摇 摇 摇 摇 摇 摇 Vol郾30 No郾4 DOI: 10郾3969/ J郾ISSN郾1000鄄3754郾2011郾04郾031 二类油层聚合物驱压裂时机的确定 佟胜强 (大庆油田有限责任公司第一采油厂, 黑龙江 大庆 163001) 摘要: 为准确给出二类油层聚合物驱压裂时机, 达到最大幅度提高采收率的目的, 采用聚类分析和单因变量多 因素方差分析相结合的方法, 对二类油层已采取压裂措施的效果进行统计, 得出二类油层聚合物驱不同类型采 出井的最佳压裂时机。 结果表明: 连通好发育好的采出井压裂最佳时机为含水小于80%, 处在含水稳定期; 连 通好发育差的采出井压裂最佳时机为含水小于85%, 处在含水稳定期; 连通差发育好的采出井压裂最佳时机为 3 含水小于80%, 注入井注入强度大于10 m / (m ·d); 连通差发育差的采出井压裂最佳时机为含水小于85%, 3 注入井注入强度大于10 m / (m ·d)。 关 键 词: 二类油层; 聚合物驱; 统计分析; 措施优化 中图分类号: TE357郾1摇 摇 摇 文献标识码: A摇 摇 摇 文章编号: 1000鄄3754 (2011) 04鄄0131鄄04 TIMING OF THE FRACTURING OF POLYMER FLOODED TYPE鄄域OIL RESERVOIRS TONG Shengqiang (No郾1 Oil Production Company of Daqing Oilfield Plant Ltd郾 ,Daqing 163001, China) Abstract: In order to find the perfect timing for the fracturing of polymer flooding in type 域reservoir so as to reachthegreatestincreaseinrecoveryfactor,clusteranalysisandmulti鄄factordeviationanalysiscombinedwith sin鄄 gle factor variable are applied,and statistics on fracturing effect of type 域reservoir is done. The best fracturing timingfordifferentproductionwellsduringpolymerfloodingintype 域reservoirhasbeenobtained. Theresultshows that for well鄄connected and well鄄developed production wells,the best timing for fracturing is the stable water cut period whenthewatercutisbelow80%;forwell鄄connectedandpoor鄄developedwells,thebesttimingisthestable water cut periodwhenthewater cut isbelow85%;forpoor鄄connectedandwell鄄developedwells,thebesttiming is