基于matlab的边坡稳定性极限上限分析程序开发_唐高朋.pdfVIP

34 7 Vol.34 No. 7 2013 7 Rock and Soil Mechanics Jul. 2013 (2013) 07 2091 08 MATLAB 1 1 1 1 2 1. 410075 2. 550001 MATLAB Ncr SQPSQP 3 Ncr Ncr    Ncr  MATLAB TU 457 A Program development for slope stability using MATLAB software and upper bound limit analysis 1 1 1 1 2 TANG Gao-peng ZHAO Lian-heng LI Liang GAO Lian-sheng TAN Han-hua 1. School of Civil Engineering, Central South University, Changsha 410075, China; 2. Guizhou Communications Planning and Propecting Design Academy, Guiyang 550001, China Abstract: Based on the upper bound limit analysis, the functional program about the slope stability problem was developed by MATLAB. The stability factor (Ncr) and graph of critical slip surface can be visually shown in the program window. The solutions of stability factor (Ncr) were obtained through the calculation results of nonlinear and sequential quadratic programs (SQP), combined with the method of exhaustion to avoid sticking at the local optimization. The results demonstrated the effectiveness of the program. The influence on the stability of slope was evaluated by analyzing the factors in terms of the internal frictional angle , slope angles  and . The calculation results show that the stability factor (Ncr) is more sensitive to the frictional angles  and  than  . In addition, if the frictional angles  and  are close to each other and the values of  and  fluctuate in the narrow range, the slope stability