基于plc液体药品成分混合的控制设计毕业论文.docVIP

基于PLC液体药品成分混合的控制设计 摘要： PLC是一种数字运算操作的电子装置，是专门为了在工业环境下应用而设计的。它采用可编程的存储器，用来在其内部存储执行逻辑运算、算术运算、顺序控制、定时、计数等操作的指令，通过模拟数字式的输出和输入控制各种类型的机械和生产过程。本文采用了PLC实现对多种液体混合的自动控制。以三种液体的混合控制为例，将三种液体通过液面传感器按来决定比例进行混合，在电动机定时搅拌一段时间后，然后将混合的液体输出容器，同时实现循环再利用。设计以液体混合控制系统方案为中心,包括系统总体方案选择，控制系统的硬件系统组成、接线图设计，软件部分设计,并对其中的设计及制作过程做简单的介绍和说明。 关键字：PLC可编程控制器 定时器 液位传感器 Based on the PLC liquid pharmaceutical composition of mixed control design Abstract：PLC is the Programmable Logic Controller, it is a kind of electronic device for digital operation, is designed for applications in the industrial design environment. It uses a programmable memory, used in the implementation of its internal storage logical, sequential control, timing, counting and arithmetic operation, operation instruction, through the digital to analog output or input control various types of machinery or production process. This design uses the PLC to achieve a variety of liquid mixing and automatic control. The liquid mixture in three control as an example, three kinds of liquid through a liquid level sensor according to the determined proportion to mix, in motor timing after agitating for a period of time, then the mixed liquid output container, while realizing cyclic utilization. Design of liquid mixing control system as the center, including the system overall scheme, the control system hardware system components ( PLC, liquid level sensor, electromagnetic valve, a contactor, a stirring motor ), wiring diagram design, design of the software section ( I/O address assignment design, program design, the design of ladder diagram, flowchart design ), and on the the design and production process of doing brief introduction and description. Keywords: Programmable Logic Controller PLC Timer Liquid level sensor 目录 摘要 1 Abstract 2 1 概述 1 1.1 PLC的概述 1 1.1.1 PLC的由来 1 1.1.2 PLC的定义 1 1.1.3 PLC的现状及未来发展状况 1 1.1.4 PLC的特点 2 1.2 液体搅拌机简介 2 1.3 立式搅拌