毕业设计(论文)外文参考资料及译文-基于PLC磨板废水自动控制处理系统设计.docVIP

毕 业 设 计（论 文）外 文 参 考 资 料 及 译 文 设计(论文)题目：基于PLC的磨板废水自动控制处理系统设计? 2011 年 2月 20 日 Control Devices and PLC Joseph La Fauci From Wikipedia, the free encyclopedia Several types of control devices are used in industry to satisfy the following control needs. Mechanical Control、Pneumatic Control、Electromechanical Control、Electronic Control、Computer Control、Programmable Logic Control (PLC) Mechanical control includes cams and governors. Although they have been used for the control of very complex machines, to be cost effectively, today they are used for simple and fixed-cycle task control. Some automated machines, such as screw machines, still use cam-based control. Mechanical control is difficult to manufacture and is subject to wear. Pneumatic control is still very popular for certain applications. It uses compressed air, valves, and switches to construct simple control logic, but is relatively slow. Because standard components are used to construct the logic, it is easier to build than a mechanical control. Pneumatic control parts are subject to wear. As does a mechanical control, an electromechanical control use switches, relays, timers, counters, and so on, to construct logic. Because electric current is used, it is faster and more flexible. The controllers using electromechanical control are called relay devices. Electric control is similar to electromechanical control, except that the moving mechanical components in an electromechanical control device are replaced by electronic switches, which works faster and is more reliable. Computer control is the most versatile control system. The logic of the control is programmed into the computer memory using software. It not only can be for machine and manufacturing system control, but also for data communication. Very complex control strategies with extensive computations can be programmed. The first is the interface with the outside world. Internally, the computer uses a low voltage (5 to 12 volts) and a