模具毕业设计病床背板丝杆的模具设计.docx

病床背板丝杆的模具设计摘 要随着时代的发展，模具设计及制造的发展也越来越“现代化”，越来越“高效益”。当今，模具已经成为塑料制品生产与更新不可或缺的基础和前提，往往在注射模具的设计技术与制造水平上，常可标志一个国家工业化的发展程度。本次设计对病床背板丝杆进行注塑模具设计。对该塑件进行工艺性分析与工艺计算并确定注射机型号，确定合理的注塑工艺方案。通过大量的查阅文献资料和实验研究，理论和实践结合，进行比较分析，通过查阅图书馆和网上的资料，确定塑料模具的大体结构，进行模具各数据的设计计算。运用solidworks软件进行三维建模、选择并确定分型面、型腔的分布及确定、设计浇注系统、成型零部件的计算、选择及确定脱模机构和导向机构，最后进行注射机的校核。使用solidworks软件在电脑上进行三维建模，再对各个数据进行修正、改进，之后画出模具的总装配图，各个非标准零部件的零件图。关键词： 病床背板丝杆 注塑模具 三维建模 Hospital Bed Backplane Lead Screw Mold Design ABSTRACT With the development, mold design and manufacturing development of more and more modern, more and more cost-effective. Today, the mold has become the production of plastic products and update the indispensable foundation and prerequisite for, and often in the injection mold design and manufacturing level, you can often mark the degree of development of a countrys industrialization. The design the backplane of beds screw injection mold design. Process analysis and process the plastic parts and to determine injection machine model, injection molding process to determine a reasonable program. Combination of a comparative analysis of a large number of literature data and experimental research, theory and practice, access to libraries and online information to determine the general structure of the plastic mold, mold data design calculations. Solidworks software for three-dimensional modeling, to select and determine the parting surface, the distribution of the cavity and determine the design of gating system, the calculation of the molded parts, select and determine the pulling mechanism and guide mechanism, the final check of the injection molding machine. SolidWorks software on the computer three-dimensional modeling, then individual data correction, improvement, and then draw the mold assembly drawing, parts diagram of the various non-standard parts.Key Words: Bed backplane lead screw Injection mold Three-dimensional modeling目 录第一章 绪论11.1前言11.2模具发展现状及发展方向11.2.1 国内外注塑模具的发展现状11.2.2 国内外注塑模具的发展趋势2第二章 零件材料分