转子试验台毕业设计立式叶盘-转子碰摩测试实验台的设计与分析.docVIP

立式叶盘-转子碰摩测试实验台的设计与分析 作者姓名： 指导教师： 单位名称：机械工程与自动化 专业名称：机械工程及自动化 201年6月 Northeastern University June 2013 毕业设计（论文）任务书 毕业设计论文题目 立式叶盘-转子碰摩测试实验台的设计与分析 基本内容 应用制图软件SolidWorks对本课题所研究的叶-转子建模。 3．应用有限元软件ANSYS 对转子进行静力学分析、模态分析和谐响应分析。 ．应用仿真软件ADAMS对进行仿真．评估总结系统运行时所受的各种影响，为进一步的研究打下坚实的基础。毕业设计（论文）专题部分： 题目： 　　　　　　　　　　　　　　　 设计或论文专题的基本内容： 学生接受毕业设计（论文）题目日期 　　　　　　　　　　　　　第　1　周 指导教师签字： 201年　 月日  摘要 然后利用ANSYS 有限元分析软件，对模型进行静分析、模态分析和谐响应分析，分析的固有特性。到仿真软件ADAMS中进行仿真研究系统在正常运转时， 关键词：压气机 立式试验台 叶片 有限元 仿真 柔体  The design and analysis of vertical blade disc-rotor rubbing test rig Abstract Rotating machinery is the most widely used class of mechanical equipment in the industrial sector , such as compressor, compressor, turbine, a variety of construction machinery and many other important mechanical equipment fall into this category.Blade-rotor system play an irreplaceable role as a core component of rotating machinery in electric power, energy, transportation, petrochemical and defense fields. For compressor and other large rotating machinery, friction faults are often occur in the running (especially startup) process between the rotating parts and the stationary parts,leading to excessive of the vibration or even damage the unit.This friction between rotor and Stator often caused by other faults, such as rotor mass unbalance, rotor bending, rotor misalignment, lack of space and so on.With large units toward high performance, high efficiency development and movement gap becomes smaller, the possibility of rubbing increases.Therefore, studying the mechanism of rubbing vibration , the correct diagnosis and prevention of rubbing on the units safety is very important. First, using SolidWorks software to design and modeling the vertical blade disc-rotor rubbing test rig.Then, using the finite element analysis software ANSYS, blade disk model for static analysis, modal analysis and harmonic response analysis, analysis of the inherent characteristics of blade discs.