[信息与通信]TEMS_基本使用方法.pptVIP

GPRS测试 手机设置 在某些网络中，需要在手机中设置一个so-called data account才能运行GPRS或HSCSD。 Creating a GPRS Data Account in the T68 1、At the top menu level, browse to the Connect menu. Press YES。 2、Scroll down to the bottom of the menu, where you will find an item Data comm.“，Press YES。 3、At the top is the choice Data accounts. Press YES to select it。 4、Add account? -- Press YES。 5、Press YES to select GPRS data。 6、Fill in a name for the account, and then all that is applicable of the following: the APN (Access Point Name), user id, and password。 7、When you are done, scroll down to the line Save? and press YES. The new account is now added beneath the Add account? line。 8、With the account selected, press YES. You will now see a CID number, representing a PDP context Identifier. This number is part of the access phone number for the GPRS service and will entered in the dialup configuration 。 GPRS测试 拔号网络配置 Installing the TEMS Mobile as a Modem Modem Installation in Windows 2000 1、On the Control Panel, double-click Phone and Modem. 2、Select the region you are in, and enter your area code number. Click OK. 3、In the Phone and Modem Options dialog, select the Modems tab. 4、Click Add. The Add/Remove Hardware Wizard appears. 5、Check Dont detect my modem; I will select it from a list. Click Next. 6、Under Manufacturers, select Ericsson (for T68, R520m) or Sony Ericsson (for T62u); under Models, select Ericsson T68 Cable Modem (etc.). Click Next. 7、Select the COM port you want to connect the mobile to. Click Next. 8、After a short while the text Your modem has been set up successfully should appear. Click Finish. 9、In the Phone and Modem Options dialog, select the relevant Cable Modem and click Properties. 10、On the General tab, verify that Maximum Port Speed is set to 115200. GPRS测试 11. Select the Advanced tab. In the box Extra initialization commands: you can enter commands that adjust QoS and PDP context settings for GPRS: see section 6.4. You can also enter commands relating to HSCSD: see section