Autodyn实例8.pdfVIP

Ex.8: Shaped Charge Jet FORMATION IMPACT Stretch 1 Ex. 8: Shaped Charge Jet – Part 1 Part 1 – Axial 2D Shaped Charge Jet Formation New Model Ident: 2DShaped Symmetry: 2D and Axial Define Materials Load AL2024T351 (Shock – JC), Copper (Shock – none) and TNT. Modify AL2024T351 Add failure to the model (plastic strain of 25%) Add erosion to the model: instantaneous geometric strain at 250%. Modify TNT Under cutoffs, change the minimum density factor to 1.e-6. Create a New Material Name = air EOS is ideal gas: Pref = 1.225e-3, γ= 1.4, Tref = 288, cv = 717.5 2 Ex. 8: Shaped Charge Jet – Part 1 Define Initial Conditions Name = StillAir. Material = air Internal Energy = 206640 J. Define Boundary Conditions Name = FlowOut, Type = Euler flowout. Define Part Name = Space Solver = Euler Select Part Wizard Select Box: X origin = -100, Y origin = 0.0, DX = 275, and DY = 100 Define cells in I = 550, Cells in J = 200 Grade zoning in I, 225*0.25 mm, centred Grade zoning in J, 100*0.25 mm, lower J. Fill with initial condition: StillAir 3 Ex. 8: Shaped Charge Jet – Part 1 Fill Euler Part Rectangle x1,x2,y1,y2 = -50, -3, 0, 20 Fill inside with TNT Quad Points = (-3,