MMA8452 驱动.docVIP

G-Sensor 8452驱动 8452是一款G-Sensor芯片，采用I2C跟主芯片通讯，采用中断方式跟操作系统协作。通过内部检测XYZ三个方向的加速度，实现各种应用。原理框图如下： 现在来实现在WINCE中的I2C驱动，读写的时序波形图分别如下： 读： 写： 基础写函数实现如下： static P_XLLP_OST_T ost_reg = 0; static XLLP_I2C_T *i2c_reg = NULL; static XLLP_CLKMGR_T *clk_reg = NULL; //在初始化中要映射 static int OS_I2CMasterWriteData(XLLP_UINT8_T slaveAddr, const XLLP_UINT8_T * bytesBuf, int bytesCount) { volatile int status; XLLP_BOOL_T bSENDSTOP = XLLP_TRUE; //写完之后发停止位 status = XllpCustomI2CWrite((P_XLLP_I2C_T)(i2c_reg), (P_XLLP_OST_T)(ost_reg), slaveAddr, bytesBuf, bytesCount, bSENDSTOP,25); return status; } static int MMA8452_WriteSensorReg( const XLLP_UINT8_T subAddress, XLLP_UINT8_T *bufP ) { XLLP_UINT8_T buffer[2]; int status; int lock; buffer[0] = subAddress; buffer[1] = *bufP; gSensorSlaveAddr = 0x1c; //I2C地址 lock = __i2c_acquire_lock(); status = OS_I2CMasterWriteData( gSensorSlaveAddr, buffer, 2); if (XLLP_STATUS_SUCCESS != status) { RETAILMSG(1, (TEXT(Failed to write MMA8452_WriteSensorReg.\r\n))); } __i2c_release_lock(lock); return status; } 基础读函数实现如下： static int OS_I2CMasterWriteData_Read(XLLP_UINT8_T slaveAddr, const XLLP_UINT8_T * bytesBuf, int bytesCount) { volatile int status; XLLP_BOOL_T bSENDSTOP = XLLP_FALSE; //写完后不发停止位 status = XllpCustomI2CWrite((P_XLLP_I2C_T)(i2c_reg), (P_XLLP_OST_T)(ost_reg), slaveAddr, bytesBuf, bytesCount, bSENDSTOP,25); return status; } static int OS_I2CMasterReadData(XLLP_UINT8_T slaveAddr, XLLP_UINT8_T * bytesBuf, int bufLen) { volatile int status; XLLP_BOOL_T bSENDSTOP = XLLP_TRUE; //读完后发停止位 status = XllpCustomI2CRead((P_XLLP_I2C_T)(i2c_reg), (P_XLLP_OST_T)(ost_reg), slaveAddr, bytesBuf, bufLen, bSENDSTOP,25); return status; } static int MMA8452_ReadSensorReg( const XLLP_UINT8_T subAddress, XLLP_UINT8_T *bufP ) { XLLP_UINT8_T buffer[1]; int status; int lock; buffer[0] =