尺寸控制解决方案介绍-3DCS.pptVIP

* 谢谢! 3DCS was the first CAA V5 Certified GOLD partner for CATIA V5. Direct contact with Dassault Systemes development team in Suresnes, France. Refer to The Dimensional Management Process PPT for further explanation of this process. 3DCS was the first CAA V5 Certified GOLD partner for CATIA V5. Direct contact with Dassault Systemes development team in Suresnes, France. Refer to The Dimensional Management Process PPT for further explanation of this process. 3DCS was the first CAA V5 Certified GOLD partner for CATIA V5. Direct contact with Dassault Systemes development team in Suresnes, France. Refer to The Dimensional Management Process PPT for further explanation of this process. User Base of Tolerance Analysis Software: Today most organizations that have incorporated tolerance analysis into their design/manufacturing process have a separate analyst group responsible for performing tolerance analysis. Paradigm Shift occurring in user base: This trend is changing where designers are being asked to do their own analysis on their parts and/or subassemblies. As designers already have enough to do, 3DCS Designer must be easy to learn and use. Designers will focus on their area of expertise performing simple baseline analysis, I.e hole, clearance studies, interference checking… Analysts will be responsible for System level modeling as well as modeling areas that are complex in nature. 3DCS Designer: A fully feature based solution with capability’s focused on the needs of Designers Engineers. Finally, a variation analysis solution for CATIA V5, focused specifically on the needs of designers and engineers. 3DCS Designer is an easy to learn and easy to use dimensional analysis solution that predicts the amount of part and process variation and identifies their source. 3DCS Designer quickly evaluates part GDT early in the product development cycle so that desired fit and function specifications are achieved in production. Targeted for users with basic know