基于PLC的灌装生产线流量闭环控制系统设计【终稿】毕业设计论文.docxVIP

学号：夜自升北京化工大学继续教育学院毕业论文（设计）论文题目：基于PLC的灌装生产线流量闭环控制系统设计专业：自动化层次：本科班级：学习形式：学生姓名：导师姓名：开题日期：2014年3月8日 2014年6月8日基于PLC的灌装生产线流量闭环控制系统设计摘 要随着可编程控制器（PLC）控制功能和通信功能的日益完善和加强，目前许多企业为了降低成本，节省开发时间，同时又能满足控制要求，在组建控制系统时，常常采用PLC实现下位控制，用上位监控软件WinCC实现上位监控管理。本文是在这样的背景下，完成基于PLC灌装生产线控制系统设计,其中重点研究流量的闭环控制，实现对进料的流量按一定配比混料。在灌装生产线中几种物料的合成、混合是很常见的工序，完善的自动控制装置是提高生产效率和经济效益的重要手段。灌装生产线流量闭环控制系统由流量检测传感器、电动调节阀、变频调速泵、变频器、PLC和监控装置等组成。由西门子S7-300PLC实现闭环控制，用WinCC软件在PC机上实现监控，利用PID运算控制电动调节阀的开度来实现对流量的闭环控制。关键字：PLC流量控制 灌装生产线 WinCCPIDAbstractWith the programmable logical controller（PLC）increasingly improve and strengthen the control and communication functions, in order to reduce costs, save development time, while at the same time meet the control requirements, many enterprises often use PLC to achieve the subordinate control ,with upper monitoring software WinCC to achieve the upper control management while establish the control system.In such a context , the article completed the design of the bottling production line control system based on PLC , which focus on the study of the flow closed-loop control , realized a certain proportion of mixture of the feed flow. In the bottling production line , the synthesis and mixture of several materials is a very common process, automatic control device for perfect is an important means to improve the production efficiency and economic benefits . The flow closed-loop control of filling production line system consists of a flow testing sensor , electric control valve , variable speed pump , frequency converter , PLC and monitoring devices and other components . Using the Siemens S7-300PLC to achieve closed-loop control , with the WinCC software to complete monitoring in the PC machine , and through PID operation control the opening degree of the electric control valve to achieve closed-loop control of the flow .Key Words: PLC Flow control Bottling production line WinCC PID目录引言1第1章灌装生产线流量闭环控制系统概述2第1.1节系统控制任务与设计要求2第1.2节系统控制分析21.2.1 控制工艺21.2.2 信号分