RoseMirrorHA 3 2 0 for Windows快速安装手册(英文版).doc

RoseMirrorHA 3 2 0 for Windows_quick-EN Chapter 1 Pre-requirement before Installation System and Hardware Requirement Before installing software, please make sure that there are at least two NIC (Network Interface Card) installed in each server and each NIC is in different subnet. Platform Requirement RoseMirrorHA is able to running in Windows 2000 and any version of Windows 2003. For Windows 2000, the version must be Windows 2000 SP3 and above in order to fully support RoseMirrorHA Chapter 2 Install the software A、Please insert RoseMirrorHA CDROM to the Drive and double-click RoseMirrorHA*.MSI to Begin to Install. Follow the installation hint step by step. Please reboot the system when complete the installtion. B、To look up RoseMirrorHA Version，Please go to Control Panel - Add or Remove Programs. Select “Click here for support information” as following: Chapter 3 Uninstall the Software If user wants to uninstall the software, please go to Control Panel - Add or Remove Programs, select RoseMirrorHA and press “Remove” bottom to begin to uninstall. Please reboot the software if user want to reinstall RoseMirrorHA Chapter 4 Software Configuration RoseMirrorHA Service After completing the installtion and rebooting the system, all the services of RoseMirrorHA will automatically start. User can check whether MirrrorHAService, MirrorMonitor and MirrorService are started or not through “Management tool - Services”. If user needs to stop RoseMiorrorHA service, please stop MirrorMonitor firs, then stop MiorrorHAService and MirrorService. There service must be stop for complete stop. To restart the service, user only need to restart MirorrMonitor to start RoseMirrorHA service. Start RoseMirrorHA Control Center To start RoseMirrorHA Control Center ，Select“Program-RoseMirrorHA-RoseMirrorHA Control Conter”. Configure Application Select“System-Wizard - Config wizard”start Configure wizard。 Start Page The start page introduces the purpose of the connection wizard. The Connec